Analog to Digital Converters (ADC)
Use the filters and product table below to compare Analog to Digital Converters (ADC) components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Number of Bits | Sampling Rate (Per Second) | Number of Inputs | Input Type | Data Interface | Configuration | Ratio - S/H:ADC | Number of A/D Converters | Architecture | Reference Type | Voltage - Supply, Analog | Voltage - Supply, Digital | Features | Operating Temperature | Supplier Device Package | Mounting Type | Grade | Qualification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD7820LPZIC ADC 8BIT FLASH 20PLCC |
1,841 | - |
|
Datasheet | - | 20-LCC (J-Lead) | Tube | Obsolete | 8 | - | 1 | Single Ended | Parallel | S/H-ADC | 1:1 | 1 | Flash | External | 5V | 5V | - | -40°C ~ 85°C | 20-PLCC (9x9) | Surface Mount | - | - |
|
AD7667ACPZRLIC ADC 16BIT SAR 48LFCSP |
2,717 | - |
|
Datasheet | PulSAR® | 48-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | 16 | 1M | 1 | Pseudo-Differential | SPI, Parallel, DSP | S/H-ADC | 1:1 | 1 | SAR | External, Internal | 5V | 5V | - | -40°C ~ 85°C | 48-LFCSP-VQ (7x7) | Surface Mount | - | - |
|
AD7892AN-2IC ADC 12BIT SAR 24DIP |
3,061 | - |
|
Datasheet | - | 24-DIP (0.300", 7.62mm) | Tube | Obsolete | 12 | 500k | 2 | Single Ended | SPI, Parallel | S/H-ADC | 1:1 | 1 | SAR | External, Internal | 5V | 5V | - | -40°C ~ 85°C | 24-PDIP | Through Hole | - | - |
|
ADAS3023BCPZ-RL7IC ADC 16BIT SAR 40LFCSP |
2,156 | - |
|
Datasheet | iCMOS® | 40-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | 16 | 500k | 8 | Differential | SPI | S/H-PGA-ADC | 1:1 | 1 | SAR | External, Internal | 5V | 5V | PGA, Simultaneous Sampling | -40°C ~ 85°C | 40-LFCSP-VQ (6x6) | Surface Mount | - | - |
|
AD7693BCPZ-R2IC ADC 16BIT SAR 10LFCSP |
2,392 | - |
|
Datasheet | PulSAR® | 10-VFDFN Exposed Pad, CSP | Tape & Reel (TR) | Obsolete | 16 | 500k | 1 | Differential | SPI, DSP | S/H-ADC | 1:1 | 1 | SAR | External | 5V | 5V | - | -40°C ~ 85°C | 10-LFCSP-WD (3x3) | Surface Mount | - | - |
|
|
AD7824KNIC ADC 8BIT FLASH 24DIP |
4,815 | - |
|
Datasheet | - | 24-DIP (0.300", 7.62mm) | Tube | Obsolete | 8 | 50k | 4 | Single Ended | Parallel | MUX-S/H-ADC | 1:1 | 1 | Flash | External | 5V | 5V | - | 0°C ~ 70°C | 24-PDIP | Through Hole | - | - |
|
AD7124-4TRUZ-EPIC ADC 24BIT SIGMA-DELTA 24TSSOP |
3,282 | - |
|
Datasheet | - | 24-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | 24 | 19.2k | 4 | Differential, Pseudo-Differential, Single Ended | DSP, MICROWIRE™, QSPI™, and SPI™ | MUX-PGA-ADC | 0:1 | 1 | Sigma-Delta | External, Internal | ±1.8V, 2.7V ~ 3.6V | 1.65V ~ 3.6V | PGA, Temperature Sensor | -55°C ~ 125°C | 24-TSSOP | Surface Mount | - | - |
|
|
AD7572AJN10IC ADC 12BIT SAR 24DIP |
3,197 | - |
|
Datasheet | - | 24-DIP (0.300", 7.62mm) | Tube | Obsolete | 12 | - | 1 | Single Ended | Parallel | ADC | - | 1 | SAR | Internal | 5V, -11.4V ~ 16.5V | +5V, -11.4V ~ 16.5V | - | 0°C ~ 70°C | 24-PDIP | Through Hole | - | - |
|
AD7863AR-10REEL7IC ADC 14BIT DUAL 2CH 28-SOIC |
330 | - |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | 14 | 175k | - | - | Parallel | - | - | 2 | - | - | - | - | - | -40°C ~ 85°C | 28-SOIC | Surface Mount | - | - |
|
AD7579AQIC ADC 10BIT LC2MOS 24-CDIP |
360 | - |
|
Datasheet | - | 24-CDIP (0.300", 7.62mm) | Tube | Obsolete | 10 | 50k | - | - | Parallel | - | - | 1 | - | - | - | - | - | -25°C ~ 85°C | 24-CDIP | Through Hole | - | - |
Analog to Digital Converters (ADC) FAQ
Common questions about filtering, comparing and sourcing Analog to Digital Converters (ADC) components.
How can I narrow the Analog to Digital Converters (ADC) selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Analog to Digital Converters (ADC) part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
