Digital Potentiometers
Use the filters and product table below to compare Digital Potentiometers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Programmable | Taper | Configuration | Number of Circuits | Number of Taps | Resistance (Ohms) | Interface | Memory Type | Voltage - Supply | Features | Tolerance | Temperature Coefficient (Typ) | Mounting Type | Grade | Qualification | Supplier Device Package | Operating Temperature | Resistance - Wiper (Ohms) (Typ) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX5405EUB-T256-TAP LOW-DRIFT DIGIPOT |
1,492 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | Not Verified | Linear | Potentiometer | 2 | 256 | 100k | SPI | Volatile | 2.7V ~ 5.5V | - | ±25% | 35ppm/°C | Surface Mount | - | - | 10-uMAX | -40°C ~ 85°C | 275 |
|
DS1868S-100+T&RIC DGTL POT 100K 2CH 16SOIC |
1,000 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | Not Verified | Linear | - | 2 | 256 | 100k | - | Volatile | 2.7V ~ 3.3V, 4.5V ~ 5.5V | - | - | 750ppm/°C | Surface Mount | - | - | 16-SOIC | -40°C ~ 85°C | - |
|
DS1849B-004DS1849B-004 |
810 | - |
|
Datasheet | * | - | Bulk | Active | Not Verified | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX5431CEUBVOLTAGE-DIVIDER FOR PGA |
1,403 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | Not Verified | Linear | Potentiometer | 1 | 4 | 57k | Parallel | Volatile | 12V ~ 15V | - | - | - | Surface Mount | - | - | 10-uMAX | -40°C ~ 85°C | 14 |
|
DS1848E-010DUAL TEMP-CONTROLLED RESISTOR |
956 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | - | Linear | Rheostat | 2 | 256 | 10k | I2C | Non-Volatile | 3V ~ 5.5V | Selectable Address, Temperature Sensor | - | 850ppm/°C | Surface Mount | - | - | 14-TSSOP | -40°C ~ 95°C | - |
|
|
MAX5421CEUBVOLTAGE DIVIDER FOR PGAS |
808 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | Not Verified | Linear | Potentiometer | 1 | 4 | 15k | Parallel | Volatile | ±4.75V ~ 5.25V | - | - | - | Surface Mount | - | - | 10-uMAX | -40°C ~ 85°C | 500 |
|
DS1847B-050DUAL NV VARIABLE RESISTOR |
15,106 | - |
|
Datasheet | - | 16-LBGA, CSPBGA | Bulk | Active | Not Verified | Linear | Rheostat | 2 | 256 | 50k | I2C | Non-Volatile | 3V ~ 5.5V | Selectable Address, Temperature Sensor | - | 850ppm/°C | Surface Mount | - | - | 16-CSBGA (4x4) | -40°C ~ 95°C | - |
|
|
DS1666S-50IC DGTL POT 50KOHM 128TAP 16SOIC |
4,787 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Not Verified | Pseudo-Logarithmic | Potentiometer | 1 | 128 | 50k | Up/Down (U/D, INC, CS) | Volatile | 5V | - | ±20% | 750ppm/°C | Surface Mount | - | - | 16-SOIC | -40°C ~ 85°C | 350 |
|
|
DS1666S-50+IC DGTL POT 50KOHM 128TAP 16SOIC |
2,976 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Not Verified | Pseudo-Logarithmic | Potentiometer | 1 | 128 | 50k | Up/Down (U/D, INC, CS) | Volatile | 5V | - | ±20% | 750ppm/°C | Surface Mount | - | - | 16-SOIC | -40°C ~ 85°C | 350 |
|
DS1666-10+IC DGTL POT 10KOHM 128TAP 14DIP |
3,521 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Not Verified | Pseudo-Logarithmic | Potentiometer | 1 | 128 | 10k | Up/Down (U/D, INC, CS) | Volatile | 5V | - | ±20% | 750ppm/°C | Through Hole | - | - | 14-PDIP | -40°C ~ 85°C | 350 |
Digital Potentiometers FAQ
Common questions about filtering, comparing and sourcing Digital Potentiometers components.
How can I narrow the Digital Potentiometers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Digital Potentiometers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
