Microprocessors
Use the filters and product table below to compare Microprocessors components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Core Processor | Number of Cores/Bus Width | Speed | Co-Processors/DSP | RAM Controllers | Graphics Acceleration | Display & Interface Controllers | Ethernet | SATA | USB | Voltage - I/O | Operating Temperature | Grade | Qualification | Security Features | Mounting Type | Supplier Device Package | Additional Interfaces |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IP80C88IC MPU 5MHZ 40DIP |
943 | - |
|
Datasheet | 40-DIP (0.600", 15.24mm) | - | Bulk | Active | 80C88 | 1 Core, 16-Bit | 5MHz | - | - | No | - | - | - | - | 5V | -40°C ~ 85°C (TA) | - | - | - | Through Hole | 40-PDIP | - |
|
CS80C286-16IC MPU 16MHZ 68PLCC |
189 | - |
|
Datasheet | 68-LCC (J-Lead) | - | Bulk | Active | 80C286 | 1 Core, 16-Bit | 16MHz | Math Engine; 80C287 | - | No | - | - | - | - | 5.0V | 0°C ~ 70°C (TA) | - | - | - | Surface Mount | 68-PLCC (24.23x24.23) | - |
|
MR80C86/BIC MPU 5MHZ 44CLCC |
3,207 | - |
|
Datasheet | 44-CLCC | - | Bulk | Active | 80C86 | 1 Core, 16-Bit | 5MHz | - | - | No | - | - | - | - | 5V | -55°C ~ 125°C (TA) | - | - | - | Surface Mount | 44-CLCC (16.53x16.53) | - |
|
|
MR80C86-2/883IC MPU 8MHZ 44CLCC |
121 | - |
|
Datasheet | 44-CLCC | - | Bulk | Active | 80C86 | 1 Core, 16-Bit | 8MHz | - | - | No | - | - | - | - | 5V | -55°C ~ 125°C (TA) | - | - | - | Surface Mount | 44-CLCC (16.53x16.53) | - |
|
ICM7228CIJIICM7228 8-DIGIT, MICROPROCESSOR- |
451 | - |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
CDP6805E3DIC MPU 40CERDIP |
100 | - |
|
Datasheet | 40-CDIP (0.600", 15.24mm) | - | Bulk | Obsolete | CDP6805 | 1 Core, 8-Bit | - | - | DDR | No | - | - | - | - | 3V, 5V | 0°C ~ 70°C (TA) | - | - | - | Through Hole | 40-CERDIP | - |
|
IS80C86-2R249080C86- MICROPROCESSOR, 8/16 BIT, |
4,535 | - |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
CDP1802BCDXIC MPU 5MHZ 40SBDIP |
2,349 | - |
|
Datasheet | 40-CDIP (0.600", 15.24mm) | - | Bulk | Active | CDP1802 | 1 Core, 8-Bit | 5MHz | - | - | No | - | - | - | - | - | -40°C ~ 85°C (TA) | - | - | - | Through Hole | 40-SBDIP | DMA |
|
|
CS80C286-12IC MPU 12.5MHZ 68PLCC |
2,042 | - |
|
Datasheet | 68-LCC (J-Lead) | - | Bulk | Active | 80C286 | 1 Core, 16-Bit | 12.5MHz | Math Engine; 80C287 | - | No | - | - | - | - | 5.0V | 0°C ~ 70°C (TA) | - | - | - | Surface Mount | 68-PLCC (24.23x24.23) | - |
|
|
CS80C286-2580C286 - HIGH PERFORMANCE MICROP |
1,415 | - |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Microprocessors FAQ
Common questions about filtering, comparing and sourcing Microprocessors components.
How can I narrow the Microprocessors selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Microprocessors part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
