Telecom
Use the filters and product table below to compare Telecom components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Interface | Number of Circuits | Voltage - Supply | Current - Supply | Power (Watts) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HC55171CM965 REN RINGING SLIC SUBSCRIBER LI |
86,800 | - |
|
Datasheet | - | 28-LCC (J-Lead) | Bulk | Active | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | 4.75V ~ 5.25V | 6mA | 300 mW | 0°C ~ 75°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
|
HC5517CM963 REN RINGING SLIC FOR ISDN MODE |
23,580 | - |
|
Datasheet | ST-BUS™ | 28-LCC (J-Lead) | Bulk | Active | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | 4.75V ~ 5.25V | 6mA | 300 mW | 0°C ~ 70°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
HC5526CPITU CO/PABX SLIC |
2,090 | - |
|
Datasheet | - | 22-DIP (0.400", 10.16mm) | Bag | Obsolete | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | 4.75V ~ 5.25V | 5.5mA | 1.5 W | 0°C ~ 70°C | - | - | Through Hole | 22-PDIP |
|
HC5517CB963 REN RINGING SLIC FOR ISDN MODE |
1,000 | - |
|
Datasheet | ST-BUS™ | 28-SOIC (0.295", 7.50mm Width) | Bulk | Active | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | 4.75V ~ 5.25V | 6mA | 300 mW | 0°C ~ 75°C | - | - | Surface Mount | 28-SOIC |
|
HC5515IMR4717ITU CO/PABX SLIC WITH LOW POWER |
3,368 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
|
|
HC5515IPITU LOW COST, PABX SLIC |
1,871 | - |
|
Datasheet | - | 22-DIP (0.400", 10.16mm) | Bulk | Active | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | ±4.75V ~ 5.25V | 9.5mA | 1.5 W | -40°C ~ 85°C | - | - | Through Hole | 22-PDIP |
|
|
HC5526IMITU LOW COST, PABX SLIC |
1,671 | - |
|
Datasheet | - | 28-LCC (J-Lead) | Bulk | Obsolete | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | ±4.75V ~ 5.25V | 5.5mA | 150 mW | -40°C ~ 85°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
|
HC5515IMITU LOW COST, PABX SLIC |
1,638 | - |
|
Datasheet | - | 28-LCC (J-Lead) | Bulk | Active | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | ±4.75V ~ 5.25V | 9.5mA | 1.5 W | -40°C ~ 85°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
|
HC5526IPITU LOW COST, PABX SLIC |
1,577 | - |
|
Datasheet | - | 22-DIP (0.400", 10.16mm) | Bulk | Obsolete | Subscriber Line Interface Concept (SLIC) | 2-Wire, 4-Wire | 1 | ±4.75V ~ 5.25V | 5.5mA | 150 mW | -40°C ~ 85°C | - | - | Through Hole | 22-PDIP |
|
|
HC5513IMR4465SLIC, 2-4 CONVERSION, BIPOLAR |
1,000 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - |
Telecom FAQ
Common questions about filtering, comparing and sourcing Telecom components.
How can I narrow the Telecom selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Telecom part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
