Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
EL5263IS-T7IC OPAMP CFA 2 CIRCUIT 8SOIC |
7,700 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 2 | - | 4000V/µs | - | 500 MHz | 2 µA | 1.5 mV | 1.5mA (x2 Channels) | 100 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
ISL28168FHZ-T7AIC OPAMP GP 1 CIRCUIT 6SOT |
16,310 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 200 kHz | 420 kHz | 10 pA | 90 µV | 34µA | 30 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-SOT |
|
EL5211IYEIC OPAMP VFB 2 CIRCUIT 8HMSOP |
9,987 | - |
|
Datasheet | EL5211 | 8-VSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 75V/µs | 32 MHz | 60 MHz | 2 nA | 3 mV | 5mA (x2 Channels) | 65 mA | 4.5 V | 16.5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-HMSOP |
|
HA5022IBIC OPAMP CFA 2 CIRCUIT 16SOIC |
10,844 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | - | 475V/µs | 125 MHz | 65 MHz | 6 µA | 800 µV | 7.5mA (x2 Channels) | 20 mA | 9 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
EL5100IS-T13IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,490 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | - | 2200V/µs | - | 200 MHz | 2 µA | 1 mV | 2.5mA | 100 mA | 3.3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
CA3140AMIC OPAMP GP 1 CIRCUIT 8SOIC |
1,446 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 9V/µs | 4.5 MHz | - | 10 pA | 2 mV | 4mA | 40 mA | 4 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
EL5100IW-T7AIC OPAMP VFB 1 CIRCUIT SOT23-6 |
250 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Obsolete | Voltage Feedback | 1 | - | 2200V/µs | - | 200 MHz | 2 µA | 1 mV | 2.5mA | 100 mA | 3.3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
ICL7611BCPAIC OPAMP GP 1 CIRCUIT 8DIP |
14,030 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 1.6V/µs | 1.4 MHz | - | 1 pA | 5 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
EL5252IYIC OPAMP VFB 2 CIRCUIT 10MSOP |
3,863 | - |
|
Datasheet | EL5252 | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 180V/µs | 165 MHz | 270 MHz | 120 nA | 500 µV | 3mA (x2 Channels) | 105 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 10-MSOP |
|
|
EL5211IYEZ-T13IC OPAMP VFB 2 CIRCUIT 8HMSOP |
2,501 | - |
|
Datasheet | EL5211 | 8-VSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 75V/µs | 32 MHz | 60 MHz | 2 nA | 3 mV | 5mA (x2 Channels) | 65 mA | 4.5 V | 16.5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-HMSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
