Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962R9863703VHAOP AMP LOW IMPUT CURRENT |
1,295 | - |
|
Datasheet | - | - | Tray | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
5962R9863703VGAOP AMP LOW IMPUT CURRENT |
4,996 | - |
|
Datasheet | - | - | Tube | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
ASNT5037-PQC17G Diff Limiting Amp, Gain Ctrl |
4,096 | - |
|
Datasheet | - | - | Bulk | Active | Limiting | 1 | Differential | - | - | 9 GHz | - | - | 196mA | - | 3.1 V | 3.5 V | -25°C ~ 85°C | - | - | Surface Mount | - |
|
MAX40024ANL+IC OPAMP GP 2 CIRCUIT 9WLP |
4,492 | - |
|
Datasheet | - | 9-XFBGA, WLBGA | Strip | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 80 kHz | - | 0.1 pA | 100 µV | 17µA | 10 mA | 1.6 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 9-WLP (1.23x1.23) |
|
LM2904D-JFIC OPAMP GP 2 CIRCUIT 8SOIC |
1,174 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LM358DR-JFIC OPAMP GP 2 CIRCUIT 8SOIC |
3,395 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 30 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LT6274HS5#PBFIC OPAMP VFB 1 CIRCUIT TSOT23-5 |
4,454 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tube | Obsolete | Voltage Feedback | 1 | Differential | 2.2V/µs | 40 MHz | 90 MHz | 100 nA | 150 µV | 1.6mA | 35 mA | 9 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
LT6274IS5#PBFIC OPAMP VFB 1 CIRCUIT TSOT23-5 |
3,086 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tube | Obsolete | Voltage Feedback | 1 | Differential | 2.2V/µs | 40 MHz | 90 MHz | 100 nA | 150 µV | 1.6mA | 35 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
|
ISL55211IRTZ-EVALZIC AMP CLASS |
1,067 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
M38510/10107BPAIC OPAMP GP 1 CIRCUIT 8CDIP |
3,077 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Differential | 50V/µs | 15 MHz | - | 250 nA | 4 mV | - | - | 10 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
|
GN1860-TFBGA-TRIC OPERATIONAL AMPLIFIER |
3,183 | - |
|
Datasheet | - | - | Tray | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LT6200CS8LT6200 - OP AMP BUFFER 165MHZ 8- |
1,687 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Buffer | 1 | Rail-to-Rail | 50V/µs | 165 MHz | - | 23 µA | 2.5 mV | 20mA | 90 mA | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1672IMS8#PBFLT1672 - 2UA PREC R-TO-R I/O AV> |
1,884 | - |
|
Datasheet | Over-The-Top® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
HA1-5320/883AMPLIFIER; SAMPLE AND HOLD |
3,360 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Sample and Hold | 1 | - | 30V/µs | 2 MHz | - | 200 nA | 1 mV | - | 10 mA | 20 V | 20 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | 14-CERDIP |
|
LT1632IN8#PBFLT1632 - 45MHZ, 45V/US, 2X R2R I |
2,148 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 45 MHz | - | 1.15 µA | 500 µV | 4.6mA (x2 Channels) | 70 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
MAX44286TAZS+IC CURRENT SENSE 1 CIRCUIT 4WLP |
3,663 | - |
|
Datasheet | - | 4-XFBGA, WLBGA | Tube | Obsolete | Current Sense | 1 | Push-Pull | 0.08V/µs | 200 kHz | - | 20 pA | 7 µV | 12.5µA | - | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 4-WLP (0.76x0.76) |
|
|
LM7171NAB/EMVERY HIGH-SPEED, HIGH OUTPUT CUR |
2,869 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 1 | Push-Pull | 2000V/µs | 170 MHz | 220 MHz | 10 µA | 1 mV | - | 105 mA | 5.5 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
|
LA358AAPGAIC REGULATOR |
2,357 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LA4320AAAEAIC REGULATOR |
2,177 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | - | - | - | 25 nA | - | 250µA | 30 mA | - | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | SOT-23-6 |
|
|
LA321AAADIC REGULATOR |
2,817 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.15V/µs | - | - | - | 1.5 mV | 150µA | 40 mA | - | - | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
