Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TL081CPSPROTOTYPE |
2,102 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 1 | Push-Pull | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA | - | 10 V | 30 V | 0°C ~ 70°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
|
LMC662CMX/ELLI976PROTOTYPE |
2,757 | - |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 750µA | 40 mA | 4.75 V | 15.5 V | 0°C ~ 70°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
|
TLC2652AMJGBPRECISION CHOPPER-STABILIZED ADV |
2,480 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Tube | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 2.8V/µs | 1.9 MHz | - | 4 pA | 0.5 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
LM2902MX/NAK2PROTOTYPE |
3,128 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Push-Pull | 0.5V/µs | 1 MHz | - | 45 nA | 2 mV | 1.5mA | 40 mA | 3 V | 26 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
|
THS4061MJGB180-MHZ HIGH-SPEED AMPLIFIERS 8- |
3,201 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 1 | Push-Pull | 500V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA | 115 mA | 9 V | 32 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
LMV321M5/E7002868PROTOTYPE |
1,623 | - |
|
Datasheet | LMV® | SC-74A, SOT-753 | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 130µA | 160 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
|
LMH6702WGFQMLV1.7 GHZ, ULTRA LOW DISTORTION, W |
1,510 | - |
|
Datasheet | - | 10-CSOIC (0.241", 6.12mm Width) | Tray | Active | Current Feedback | 1 | Single-Ended | 3100V/µs | - | 720 MHz | 30 µA | 4.5 mV | 12.5mA | 80 mA | 10 V | 12 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 10-CFP |
|
|
LF198WG-QMLVMONOLITHIC SAMPLE AND HOLD CIRCU |
1,684 | - |
|
Datasheet | - | 14-CSOIC (0.250", 6.35mm Width) | Tube | Active | Sample and Hold | 1 | Single-Ended | - | - | - | 75 nA | 5 mV | - | 25 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 14-CFP |
|
|
LMC6482AMJ/883ULTRA-LOW BIAS CURRENT, PRECISIO |
2,890 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Rail-to-Rail | 1.3V/µs | 1.25 MHz | - | 25 pA | 750 µV | - | 30 mA | 3 V | 15.5 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
|
LB4310AAPGAMP |
4,400 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 20 nA | 500 µV | 200µA | 40 mA | 3 V | 36 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
LB4310AAPGBAMP |
4,329 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 20 nA | 500 µV | 200µA | 40 mA | 3 V | 36 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
AP4310EMTR-G1AMP |
3,447 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 20 nA | 500 µV | 200µA | 40 mA | 3 V | 36 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-SO |
|
|
NJM5532LDIC OPAMP |
3,246 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NJM2100LIC OPAMP |
4,889 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NJM2115LIC OPAMP |
1,710 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NJM4556ALDIC OPAMP |
4,885 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NJM78LR05BLIC OPAMP |
2,292 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NJM5532LIC OPAMP |
3,808 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NJU7044DNJU7044D |
3,165 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NJM78LR05DLIC OPAMP |
3,402 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
