Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4288ESDIC BUFFER 2 CIRCUIT 14SOIC |
598 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer, Voltage Feedback | 2 | - | 385V/µs | - | 250 MHz | 13 µA | 1.5 mV | 23mA (x2 Channels) | 106 mA | 2.85 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4178EPA+GAIN OF +1 CLOSED-LOOP BUFFER |
4,709 | - |
|
Datasheet | MAX4178 | 8-DIP (0.300", 7.62mm) | Bulk | Active | Buffer, Current Feedback | 1 | Single-Ended | 1.3kV/µs | - | 330 MHz | 1 µA | 500 µV | 8mA | 100 mA | - | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
MAX4251ESA-TIC OPAMP GP 1 CIRCUIT 8SOIC |
2,165 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Push-Pull, Rail-to-Rail | 0.3V/µs | 3 MHz | - | 1 pA | 70 µV | 420µA | 68 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX4243ESDIC OPAMP GP 2 CIRCUIT 14SOIC |
6,915 | - |
|
Datasheet | Beyond-the-Rails™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.04V/µs | 90 kHz | - | 2 nA | 200 µV | 14µA (x2 Channels) | 2.5 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4470EWT+TIC OPAMP GP 1 CIRCUIT 6WLP |
2,708 | - |
|
Datasheet | - | 6-WFBGA, WLBGA | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.002V/µs | 9 kHz | - | 200 pA | 500 µV | 750nA | 36 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 6-WLP (1.24x0.84) |
|
MAX473CUA+IC OPAMP GP 1 CIRCUIT 8UMAX |
1,916 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 700 µV | 2mA | - | 2.7 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | 8-µMAX |
|
|
MAX4415ESAIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,804 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 470V/µs | - | 150 MHz | 1.3 µA | 500 µV | 1.6mA | 75 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4395EUDIC OPAMP GP 4 CIRCUIT 14TSSOP |
4,374 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 500V/µs | 1.8 MHz | - | 700 nA | 500 µV | 6mA (x4 Channels) | 95 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
MAX473EPA+IC OPAMP GP 1 CIRCUIT 8DIP |
342 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 700 µV | 2mA | - | 2.7 V | 5.25 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
MAX4118ESAIC AMP DUAL HS 500MHZ 8-SOIC |
5,794 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 1200V/µs | - | 400 MHz | 3.5 µA | 1 mV | 5mA (x2 Channels) | 80 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
