Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4269ESDIC OPAMP VFB 2 CIRCUIT 14SOIC |
943 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 900V/µs | 700 MHz | 350 MHz | 3.5 µA | 1 mV | 28mA (x2 Channels) | 45 mA | 4.5 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4269EEEIC OPAMP VFB 2 CIRCUIT 16QSOP |
858 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 900V/µs | 700 MHz | 350 MHz | 3.5 µA | 1 mV | 28mA (x2 Channels) | 45 mA | 4.5 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
|
MAX4185ESDIC OPAMP DUAL 240/270MHZ 14-SOIC |
726 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 320V/µs | - | 245 MHz | 1 µA | 1.5 mV | 1mA (x2 Channels) | 60 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
MAX4268ESDIC OPAMP VFB 2 CIRCUIT 14SOIC |
3,570 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 900V/µs | 300 MHz | 300 MHz | 3.5 µA | 1 mV | 28mA (x2 Channels) | 45 mA | 4.5 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
MAX4018ESDIC OPAMP VFB 3 CIRCUIT 14SOIC |
3,283 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 3 | Rail-to-Rail | 600V/µs | - | 150 MHz | 5.4 µA | 4 mV | 5.5mA (x3 Channels) | 120 mA | 3.15 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
ICL7612ACPA+IC CMOS 1 CIRCUIT 8DIP |
1,552 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 2 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX4224ESA-TG068IC OPAMP CFA 1 CIRCUIT 8SOIC |
630 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 1700V/µs | - | 600 MHz | 4 µA | 500 µV | 6mA | 80 mA | 5.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4278EUKGAIN OF 2 CLOSED-LOOP BUFFER |
282 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | Buffer, Current Feedback | 1 | Single-Ended | 1.6kV/µs | - | 310 MHz | 1 µA | 500 µV | 8mA | 100 mA | - | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
MAX495EPA+IC OPAMP GP 1 CIRCUIT 8DIP |
4,720 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 25 nA | 200 µV | 150µA | 30 mA | 2.7 V | 6 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
ICL7612BCSA-TIC OPAMP GP 1 CIRCUIT 8SOIC |
4,913 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 5 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
