Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX406BESAIC OPAMP GP 1 CIRCUIT 8SOIC |
1,404 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 8 kHz | - | 0.1 pA | 750 µV | 1µA | 600 µA | 2.5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4239ATT+TIC OPAMP GP 1 CIRCUIT 6TDFN |
2,137 | - |
|
Datasheet | - | 6-WDFN Exposed Pad | Bulk | Active | General Purpose | 1 | Single Ended, Rail-to-Rail | 1.6V/µs | 6.5 MHz | - | 1 pA | 0.1 µV | 600µA | 40 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-TDFN (3x3) |
|
|
MAX4077ESA+IC OPAMP GP 2 CIRCUIT 8SOIC |
1,233 | - |
|
Datasheet | GainAmp™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.09V/µs | 230 kHz | - | 1 pA | 1.2 mV | 45µA (x2 Channels) | 20 mA | 2.5 V | 5.5 V | -40°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
MAX4266EUA+IC OPAMP VFB 1 CIRCUIT 8UMAX |
4,821 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | - | 900V/µs | 700 MHz | 350 MHz | 3.5 µA | 1 mV | 28mA | 100 mA | 4.5 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
MAX44206AUA+IC OPAMP DIFF 1 CIRCUIT 8UMAX |
2,333 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Differential | 1 | - | 180V/µs | 400 MHz | 180 MHz | 30 nA | 200 µV | 3.7mA | 60 mA | 2.7 V | 13.2 V | -40°C ~ 125°C | - | - | Surface Mount | 8-uMAX-EP|8-uSOP-EP |
|
ICL7614BCPAIC OPAMP GP 1 CIRCUIT 8DIP |
6,684 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.6V/µs | 1.4 MHz | - | 1 pA | 5 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX4254ESD+IC OPAMP GP 4 CIRCUIT 14SOIC |
4,693 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Push-Pull, Rail-to-Rail | 0.3V/µs | 3 MHz | - | 0.1 pA | 70 µV | 420µA (x4 Channels) | 68 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
MAX4244ESD+IC OPAMP GP 4 CIRCUIT 14SOIC |
1,755 | - |
|
Datasheet | Beyond-the-Rails™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.04V/µs | 90 kHz | - | 2 nA | 200 µV | 14µA (x4 Channels) | 2.5 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
MAX4237AESA+IC OPAMP GP 1 CIRCUIT 8SOIC |
120 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.3V/µs | 7.5 MHz | - | 1 pA | 5 µV | 350µA | - | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX4187ESD+IC OPAMP CFA 4 CIRCUIT 14SOIC |
3,359 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 4 | - | 320V/µs | - | 245 MHz | 1 µA | 1.5 mV | 1mA (x4 Channels) | 60 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
