Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4305ESA+IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,603 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Last Time Buy | Voltage Feedback | 1 | - | 1400V/µs | - | 340 MHz | 32 µA | 1 mV | 20mA | - | 7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX421EPD+IC CMOS CHOPPER 1 CIRCUIT 14DIP |
1,838 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS, Chopper (Zero-Drift) | 1 | - | 0.5V/µs | 500 kHz | - | 10 pA | 1 µV | 1.3mA | - | 5 V | 33 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
MAX414EPD+IC OPAMP GP 4 CIRCUIT 14DIP |
2,529 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 4.5V/µs | 28 MHz | - | 80 nA | 150 µV | 2.5mA (x4 Channels) | 35 mA | 4.8 V | 10.5 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
MAX479CPDIC OPAMP GP 4 CIRCUIT 14DIP |
1,666 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.04V/µs | 85 kHz | - | 3 nA | 50 µV | 13µA (x4 Channels) | - | 3 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
MAX4180ESAIC OPAMP 270MHZ 1MA 8-SOIC |
832 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 450V/µs | - | 245 MHz | 1 µA | 1.5 mV | 1mA | 60 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX421EWE+IC OPAMP ZER-DRIFT 1CIRC 16SOIC |
4,140 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 0.5V/µs | 500 kHz | - | 10 pA | 1 µV | 1.3mA | - | 5 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
MAX480ESAIC OPAMP GP 1 CIRCUIT 8SOIC |
4,286 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 0.012V/µs | - | - | 1 nA | 25 µV | 14µA | 5 mA | 1.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX2264EUEIC AMP 2.7V CELLBAND 16-TSSOP |
2,323 | - |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 16-TSSOP |
|
|
ICL7616ACSAIC OPAMP GP 1 CIRCUIT 8SOIC |
3,307 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 2 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX4105ESA+IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,727 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Last Time Buy | Voltage Feedback | 1 | - | 1400V/µs | - | 410 MHz | 32 µA | 1 mV | 20mA | - | 7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
