Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX9929FAUA+TIC CURRENT SENSE 1 CIRCUIT 8UMAX |
6,987 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 150 kHz | 1.6 µA | 6 mV | 20µA | - | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
MAX40007ANT+TIC CMOS 1 CIRCUIT 6WLP |
5,826 | - |
|
Datasheet | nanoPower | 6-XFBGA, WLPBGA | Tape & Reel (TR) | Active | CMOS | 1 | Rail-to-Rail | 0.012V/µs | 15 kHz | - | 40 pA | 300 µV | 700nA | 10 mA | 1.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-WLP (1.08x0.73) |
|
MAX44260AXT+TIC OPAMP GP 1 CIRCUIT SC70-6 |
16,988 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.3V/µs | 15 MHz | - | 5 pA | - | 750µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-6 |
|
MAX9634WERS+TIC CURRENT SENSE 1 CIRCUIT 4UCSP |
1,780 | - |
|
Datasheet | nanoPower | 4-WFBGA, CSPBGA | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 125 kHz | - | - | 100 µV | 1.1µA | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 4-UCSP (1x1) |
|
MAX4488AUT+TIC OPAMP GP 1 CIRCUIT SOT6 |
3,131 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 10V/µs | 42 MHz | - | 1 pA | 70 µV | 2.5mA | 48 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-6 |
|
MAX41400ANL+IC INST AMP 1 CIRCUIT 9WLP |
465 | - |
|
Datasheet | - | 9-XFBGA, WLBGA | Strip | Active | Instrumentation | 1 | Rail-to-Rail | 0.08V/µs | - | 28 kHz | 10 pA | 1 µV | 65µA | - | 1.7 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 9-WLP (1.26x1.23) |
|
|
MAX40024ANL+TIC OPAMP GP 2 CIRCUIT 9WLP |
11,969 | - |
|
Datasheet | - | 9-XFBGA, WLBGA | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 80 kHz | - | 0.1 pA | 100 µV | 17µA | 10 mA | 1.6 V | 3.6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 9-WLP (1.23x1.23) |
|
MAX9912EKA+TIC OPAMP GP 2 CIRCUIT SOT23-8 |
4,308 | - |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.1V/µs | 200 kHz | - | 1 pA | 200 µV | 7µA (x2 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
MAX4322EUK+TIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,929 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2V/µs | 5 MHz | - | 50 nA | 1.2 mV | 725µA | - | 2.4 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
MAX4073HAUT+TIC CURRENT SENSE 1 CIRCUIT SOT6 |
4,838 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 1.6 MHz | 40 µA | 1 mV | 500µA | - | 3 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-6 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
