Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX9611AUB+IC CURR SENSE 1 CIRCUIT 10UMAX |
2,719 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | Current Sense | 1 | - | - | 2.5 MHz | 4 MHz | 1 µA | 100 µV | 1.6mA | 15 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-uMAX/uSOP |
|
MAX4173FESA+TIC CURRENT SENSE 1 CIRCUIT 8SOIC |
1,992 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 1.4 MHz | 700 µA | 300 µV | 420µA | - | 3 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX492ESA+TIC OPAMP GP 2 CIRCUIT 8SOIC |
3,562 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 25 nA | 200 µV | 150µA (x2 Channels) | 30 mA | 2.7 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX4091ASA+IC OPAMP GP 1 CIRCUIT 8SOIC |
4,424 | - |
|
Datasheet | Beyond-the-Rails™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 20 nA | 30 µV | 130µA | - | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
MAX9943ATT+TIC OPAMP GP 1 CIRCUIT 6TDFN |
3,062 | - |
|
Datasheet | - | 6-WDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.35V/µs | 2.4 MHz | - | 4 nA | 20 µV | 550µA | 60 mA | 6 V | 38 V | -40°C ~ 125°C | - | - | Surface Mount | 6-TDFN (3x3) |
|
MAX4216EUA+IC VOLTAGE FEEDBACK 2 CIRC 8UMAX |
3,769 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Voltage Feedback | 2 | Rail-to-Rail | 600V/µs | - | 200 MHz | 5.4 µA | 4 mV | 5.5mA (x2 Channels) | 120 mA | 3.15 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
|
MAX4402AUA/V+IC OPAMP GP 2 CIRCUIT 8UMAX |
1,399 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 800 kHz | - | 0.1 pA | 1 mV | 410µA (x2 Channels) | 30 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
|
MAX4327EUB+IC OPAMP GP 2 CIRCUIT 10UMAX |
1,647 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 2V/µs | 5 MHz | - | 50 nA | 1.2 mV | 725µA (x2 Channels) | 50 mA | 2.4 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-uMAX/uSOP |
|
MAX4419EUD+IC OPAMP VFB 4 CIRCUIT 14TSSOP |
1,771 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | Voltage Feedback | 4 | Rail-to-Rail | 470V/µs | - | 150 MHz | 1.3 µA | 500 µV | 1.6mA (x4 Channels) | 75 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
MAX40010TAUT+TIC CURRENT SENSE 1 CIRCUIT SOT6 |
1,344 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 80 kHz | 65 µA | 12 µV | 350µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-6 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
