Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OP07EP+IC OPAMP GP 1 CIRCUIT 8DIP |
1,512 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.3V/µs | 600 kHz | - | 1.2 nA | 30 µV | - | - | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX4334ESD+IC OPAMP GP 4 CIRCUIT 14SOIC |
2,687 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 1.5V/µs | 3 MHz | - | 25 nA | 250 µV | 275µA (x4 Channels) | 20 mA | 2.3 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
MAX407CPAIC OPAMP GP 2 CIRCUIT 8DIP |
4,038 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.005V/µs | 8 kHz | - | 0.1 pA | 1 mV | 1µA (x2 Channels) | 600 µA | 2.5 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX407CSAIC OPAMP GP 2 CIRCUIT 8SOIC |
3,130 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.005V/µs | 8 kHz | - | 0.1 pA | 1 mV | 1µA (x2 Channels) | 600 µA | 2.5 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX44294ASD+TIC OPAMP GP 4 CIRCUIT 14SOIC |
2,288 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 5V/µs | 10 MHz | - | 6 nA | 30 µV | 1.2mA (x4 Channels) | 60 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
MAX4223EUT-TIC OPAMP CFA 1 CIRCUIT SOT6 |
4,662 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 1100V/µs | - | 1 GHz | 4 µA | 500 µV | 6mA | 80 mA | 5.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-6 |
|
|
MAX4224EUT-TIC OPAMP CFA 1 CIRCUIT SOT6 |
3,203 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 1700V/µs | - | 600 MHz | 4 µA | 500 µV | 6mA | 80 mA | 5.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-6 |
|
|
MAX412CSA-TIC OPAMP GP 2 CIRCUIT 8SOIC |
1,211 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 4.5V/µs | 28 MHz | - | 80 nA | 120 µV | 2.5mA (x2 Channels) | 35 mA | 4.8 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
MAX44298UWE+TIC CURRENT SENSE 1 CIRCUIT 16WLP |
1,637 | - |
|
Datasheet | - | 16-WFBGA, WLBGA | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | - | - | - | 1mA | - | 3 V | 5.5 V | 0°C ~ 85°C | - | - | Surface Mount | 16-WLP (2.36x2.36) |
|
MAX44285HAUA+TIC CURRENT SENSE 2 CIRCUIT 8UMAX |
4,091 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 2 | - | - | - | 80 kHz | 65 µA | 12 µV | - | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-uMAX/uSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
