Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4430ESA+TIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,581 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Last Time Buy | Voltage Feedback | 1 | - | 100V/µs | - | 180 MHz | 11 µA | 1.25 mV | 11mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX420CPA+IC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
1,285 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Zero-Drift | 1 | - | 0.5V/µs | 500 kHz | - | 10 pA | 1 µV | 1.3mA | - | 5 V | 33 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
MAX410CSA+TIC OPAMP GP 1 CIRCUIT 8SOIC |
4,471 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 4.5V/µs | 28 MHz | - | 80 nA | 120 µV | 2.5mA | 35 mA | 4.8 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ICL7612DESA+TIC OPAMP GP 1 CIRCUIT 8SOIC |
1,351 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA | - | 2 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4305EUK+TIC OPAMP VFB 1 CIRCUIT SOT23-5 |
3,066 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Last Time Buy | Voltage Feedback | 1 | - | 1400V/µs | - | 340 MHz | 32 µA | 1 mV | 20mA | - | 7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
MAX4304ESA+TIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,778 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1000V/µs | - | 740 MHz | 32 µA | 1 mV | 20mA | 70 mA | 7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ICL7652CWEIC OPAMP ZERO-DRIFT 1CIRC 16SOIC |
3,831 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Zero-Drift | 1 | - | 0.5V/µs | 450 kHz | - | 15 pA | 700 µV | 2mA | - | 5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
MAX4216ESA+TIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
1,395 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 600V/µs | - | 200 MHz | 5.4 µA | 4 mV | 5.5mA (x2 Channels) | 120 mA | 3.15 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4216EUA+TIC VOLTAGE FEEDBACK 2 CIRC 8UMAX |
2,581 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 600V/µs | - | 200 MHz | 5.4 µA | 4 mV | 5.5mA (x2 Channels) | 120 mA | 3.15 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
MAX414CPDIC OPAMP GP 4 CIRCUIT 14DIP |
1,702 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 4.5V/µs | 28 MHz | - | 80 nA | 150 µV | 2.5mA (x4 Channels) | 35 mA | 4.8 V | 10.5 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
