Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4451EKA+G069IC OPAMP VFB 2 CIRCUIT SOT23-8 |
3,594 | - |
|
Datasheet | - | SOT-23-8 | Bulk | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 485V/µs | 175 MHz | 210 MHz | 6.5 µA | 4 mV | 6.5mA (x2 Channels) | 70 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
MAX44264EWT+TCLAIC OPAMP GP 1 CIRCUIT 6WLP |
3,700 | - |
|
Datasheet | nanoPower | 6-WFBGA, WLBGA | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.002V/µs | 9 kHz | - | 200 pA | 500 µV | 750nA | 36 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 6-WLP (1.238x0.837) |
|
MAX9928FABT+G45IC CURRENT SENSE 1 CIRCUIT 5UCSP |
2,718 | - |
|
Datasheet | - | 5-WFBGA, CSPBGA | Bulk | Obsolete | Current Sense | 1 | - | - | - | 150 kHz | 1.6 µA | 600 µV | 20µA | - | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 5-UCSP (1x1.52) |
|
MAX4412EXK+TG21IC OPAMP VFB 1 CIRCUIT SC70-5 |
1,488 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 220V/µs | - | 500 MHz | 1.6 µA | 400 µV | 1.7mA | 75 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
MAX9938WEBS+TG45IC CURRENT SENSE 1 CIRCUIT 4UCSP |
1,978 | - |
|
Datasheet | - | 4-WFBGA, CSPBGA | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 60 kHz | - | 500 µV | 1.1µA | - | 1.6 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | 4-UCSP (1.05x1.05) |
|
MAX44284FAUT+TG103IC CURRENT SENSE 1 CIRCUIT SOT6 |
2,024 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 3 kHz | 80 nA | 10 µV | 21µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C | Automotive | - | Surface Mount | SOT-6 |
|
MAX4390EXT-TIC CURR SENSE 1 CIRCUIT SC70-6 |
3,188 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 500V/µs | - | 72 MHz | 15 µA | 18 mV | 3.2mA | 55 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-6 |
|
MAX479ESD+IC OPAMP GP 4 CIRCUIT 14SOIC |
1,283 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | 0.04V/µs | 85 kHz | - | 3 nA | 50 µV | 13µA (x4 Channels) | - | 3 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
806-0539-22+DIC OP AMP ASIC CSBGA |
4,101 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX40108ANT+IC OPAMP GP 1 CIRCUIT 6WLP |
3,189 | - |
|
Datasheet | - | 6-XFBGA, WLPBGA | Strip | Active | General Purpose | 1 | Rail-to-Rail | 0.08V/µs | 168 kHz | - | 55 pA | 1 µV | 25.5µA | 25 mA | 0.9 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 6-WLP (1.08x0.73) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
