Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4389EUTIC OPAMP GP 1 CIRCUIT SOT23-6 |
9,512 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 500V/µs | - | - | 2.5 µA | 7 mV | 6mA | 95 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
MAX4326EUA+TG075IC OPAMP GP 2 CIRCUIT 8UMAX |
2,500 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 2V/µs | 5 MHz | - | 50 nA | 1.2 mV | 725µA (x2 Channels) | 50 mA | 2.4 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-µMAX |
|
MAX4231AUT-TIC OPAMP GP 1 CIRCUIT SOT6 |
1,095 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 10V/µs | 10 MHz | - | 50 pA | 850 µV | 1.2mA | 200 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-6 |
|
MAX4250EUK.C60368IC OPAMP GP 1 CIRCUIT SOT23-5 |
4,976 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Push-Pull, Rail-to-Rail | 0.3V/µs | 3 MHz | - | 0.1 pA | 70 µV | 420µA | 68 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
MAX4231AXT-TIC OPAMP GP 1 CIRCUIT SC70-6 |
1,736 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 10V/µs | 10 MHz | - | 50 pA | 850 µV | 1.2mA | 200 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-6 |
|
MAX4091AUAIC OPAMP GP 1 CIRCUIT 8UMAX |
4,396 | - |
|
Datasheet | Beyond-the-Rails™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 20 nA | 30 µV | 130µA | - | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
MAX4291EXKIC OPAMP GP 1 CIRCUIT SC70-5 |
5,973 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 15 nA | 400 µV | 100µA | 20 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
LMX358AKA-TIC OPAMP GP 2 CIRCUIT SOT23-8 |
4,516 | - |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 1V/µs | 1.3 MHz | - | 18 nA | 1 mV | 240µA (x2 Channels) | 28 mA | 2.3 V | 7 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
|
MAX4335EXT-TIC OPAMP GP 1 CIRCUIT SC70-6 |
9,418 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.8V/µs | 5 MHz | - | 100 nA | 600 µV | 1.3mA | 110 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-6 |
|
|
MAX4400AUKIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,340 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1V/µs | 800 kHz | - | 0.1 pA | 800 µV | 410µA | 30 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
