Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4435ESAIC OPAMP GP 1 CIRCUIT 8SOIC |
2,071 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 388V/µs | - | 150 MHz | 14 µA | 1 mV | 15mA | 65 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4462HEUTIC INST AMP 1 CIRCUIT SOT23-6 |
1,201 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Instrumentation | 1 | Rail-to-Rail | 0.5V/µs | 2.5 MHz | 25 kHz | 1 pA | 100 µV | 800µA | 150 mA | 2.85 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
MAX4173TEUT-TIC CURRENT SENSE 1 CIRCUIT SOT6 |
1,280 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | - | - | 1.7 MHz | 700 µA | 300 µV | 420µA | - | 3 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-6 |
|
MAX4173FEUTIC CURR SENSE 1 CIRCUIT SOT23-6 |
10,171 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Current Sense | 1 | - | - | - | 1.4 MHz | 100 µA | 300 µV | 420µA | - | 3 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
|
MAX4173TEUTIC CURR SENSE 1 CIRCUIT SOT23-6 |
4,004 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Current Sense | 1 | - | - | - | 1.4 MHz | 100 µA | 300 µV | 420µA | - | 3 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
MAX4178EUK+GAIN OF +1 CLOSED-LOOP BUFFER |
1,038 | - |
|
Datasheet | MAX4178 | SC-74A, SOT-753 | Bulk | Active | Buffer, Current Feedback | 1 | - | 1300V/µs | - | 330 MHz | 1 µA | 500 µV | 8mA | 100 mA | - | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
ICL7614DCPAIC CMOS 1 CIRCUIT 8DIP |
604 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX4077ESAIC OPAMP GP 2 CIRCUIT 8SOIC |
1,063 | - |
|
Datasheet | GainAmp™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.09V/µs | 230 kHz | - | 1 pA | 1.2 mV | 45µA (x2 Channels) | 20 mA | 2.5 V | 5.5 V | -40°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX4165EUK-TG103IC OPAMP GP 1 CIRCUIT SOT23-5 |
9,913 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 2V/µs | 5 MHz | - | 50 nA | 350 µV | 1.3mA | 125 mA | 2.7 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
MAX4077EUAIC OPAMP GP 2 CIRCUIT 8UMAX |
2,768 | - |
|
Datasheet | GainAmp™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.09V/µs | 230 kHz | - | 1 pA | 1.2 mV | 45µA (x2 Channels) | 20 mA | 2.5 V | 5.5 V | -40°C ~ 70°C | - | - | Surface Mount | 8-uMAX/uSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
