Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MCP6492-E/SNIC OPAMP GP 2 CIRCUIT 8SOIC |
225 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 6V/µs | 7.5 MHz | - | 1 pA | 1.5 mV | 530µA (x2 Channels) | 15 mA | 2.4 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MCP618-I/PIC OPAMP GP 1 CIRCUIT 8DIP |
134 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.08V/µs | 190 kHz | - | 15 nA | 150 µV | 19µA | 17 mA | 2.3 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
MCP6442-E/SNIC CMOS 2 CIRCUIT 8SOIC |
289 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.003V/µs | 9 kHz | - | 1 pA | 4.5 mV | 450nA (x2 Channels) | 22 mA | 1.4 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MCP6442-E/MSIC CMOS 2 CIRCUIT 8MSOP |
101 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.003V/µs | 9 kHz | - | 1 pA | 4.5 mV | 450nA (x2 Channels) | 22 mA | 1.4 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-MSOP |
|
|
MCP6062T-E/SNIC CMOS 2 CIRCUIT 8SOIC |
5,980 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.25V/µs | 730 kHz | - | 1 pA | 150 µV | 60µA (x2 Channels) | 27 mA | 1.8 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MCP6C04T-020E/CHYIC CURR SENSE 1 CIRCUIT SOT23-6 |
342 | - |
|
Datasheet | Zero-Drift | SOT-23-6 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 500 kHz | - | 175 µA | 3.8 µV | 500µA | - | 2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
MCP661-E/SNIC OPAMP GP 1 CIRCUIT 8SOIC |
1,131 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 32V/µs | 60 MHz | - | 6 pA | 1.8 mV | 6mA | - | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
MCP6052-E/SNIC CMOS 2 CIRCUIT 8SOIC |
907 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.15V/µs | 385 kHz | - | 1 pA | 150 µV | 30µA (x2 Channels) | 26 mA | 1.8 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MCP6V86T-E/OTIC OPAMP ZER-DRIFT 1CIRC SOT23-5 |
1,353 | - |
|
Datasheet | Zero-Drift | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 1 | Rail-to-Rail | 4V/µs | 5 MHz | - | 2 pA | 25 µV | 500µA | 40 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
MCP632-E/SNIC CMOS 2 CIRCUIT 8SOIC |
428 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 10V/µs | 24 MHz | - | 4 pA | 1.8 mV | 2.5mA (x2 Channels) | 85 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
