Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6640MF/NOPBIC OPAMP VFB 1 CIRCUIT SOT23-5 |
880 | - |
|
Datasheet | LMH® | SC-74A, SOT-753 | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 170V/µs | 62 MHz | 190 MHz | 1 µA | 1 mV | 4mA | 100 mA | 4.5 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LMH6723MAIC OPAMP CFA 1 CIRCUIT 8SOIC |
463 | - |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 600V/µs | - | 370 MHz | 2 µA | 1 mV | 1mA | 110 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMC662EMIC CMOS 2 CIRCUIT 8SOIC |
310 | - |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 750µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
CLC5654INIC OPAMP CFA 4 CIRCUIT 14DIP |
13,641 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 4 | - | 2000V/µs | - | 450 MHz | 6 µA | 2.5 mV | 5mA (x4 Channels) | 70 mA | 14 V | 14 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LMH6622MAIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
969 | - |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | Differential | 85V/µs | - | 160 MHz | 4.7 µA | 200 µV | 4.3mA (x2 Channels) | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMP2234AMTIC OPAMP GP 4 CIRCUIT 14TSSOP |
371 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Differential, Rail-to-Rail | 0.048V/µs | 130 kHz | - | 0.02 pA | 10 µV | 36µA (x4 Channels) | 30 mA | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
CLC426AJPIC VOLTAGE FEEDBACK 1 CIRC 8MDIP |
3,550 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 400V/µs | 230 MHz | 130 MHz | 5 µA | 1 mV | 11mA | 70 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-MDIP |
|
CLC5644IMXIC OPAMP CFA 4 CIRCUIT 14SOIC |
1,113 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 4 | - | 1000V/µs | - | 170 MHz | 2.5 µA | 2.5 mV | 2.5mA (x4 Channels) | 70 mA | 14 V | 14 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
CLC5644IMIC OPAMP CFA 4 CIRCUIT 14SOIC |
264 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 4 | - | 1000V/µs | - | 170 MHz | 2.5 µA | 2.5 mV | 2.5mA (x4 Channels) | 70 mA | 14 V | 14 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
LMC6464BIMXIC CMOS 4 CIRCUIT 14SOIC |
1,276 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 0.028V/µs | 50 kHz | - | 0.15 pA | 250 µV | 90µA (x4 Channels) | 75 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
