Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM4136CNIC OPAMP GP 4 CIRCUIT 14DIP |
19,823 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 1V/µs | - | - | 40 nA | 500 µV | - | - | 30 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LMV922MMXIC OPAMP GP 2 CIRCUIT 8VSSOP |
13,600 | - |
|
Datasheet | LMV® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.45V/µs | 1 MHz | - | 12 nA | 1.5 mV | 400µA | 75 mA | 1.5 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
LPV358MMIC OPAMP GP 2 CIRCUIT 8VSSOP |
7,900 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.1V/µs | 152 kHz | - | 2 nA | 1.5 mV | 15µA (x2 Channels) | 16 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
LM1458MX/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
1,093 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 200 nA | 1 mV | 3mA (x2 Channels) | - | 36 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM3900MIC OPAMP GP 4 CIRCUIT 14SOIC |
7,680 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | 20V/µs | 2.5 MHz | - | 30 nA | - | 6.2mA (x4 Channels) | 10 mA | 4.4 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LM3403MXIC OPAMP GP 4 CIRCUIT 14SOIC |
1,890 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Differential | 0.6V/µs | - | - | 200 nA | 2 mV | 2.8mA (x4 Channels) | 30 mA | 3 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LP324MIC OPAMP GP 4 CIRCUIT 14SOIC |
2,169 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | 0.05V/µs | 100 kHz | - | 2 nA | 2 mV | 85µA | 10 mA | 3 V | 32 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
TL082CMXIC OPAMP JFET 2 CIRCUIT 8SOIC |
6,335 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 2 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 3.6mA (x2 Channels) | 17 mA | 36 V | 36 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
LMV924MXIC OPAMP GP 4 CIRCUIT 14SOIC |
4,853 | - |
|
Datasheet | LMV® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.45V/µs | 1 MHz | - | 12 nA | 1.5 mV | 400µA | 75 mA | 1.5 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
LPV358MIC OPAMP GP 2 CIRCUIT 8SOIC |
1,401 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.1V/µs | 152 kHz | - | 2 nA | 1.5 mV | 15µA (x2 Channels) | 16 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
