Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMC6044INIC CMOS 4 CIRCUIT 14DIP |
1,538 | - |
|
Datasheet | LMC® | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 52µA (x4 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 14-PDIP |
|
LM348MX/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
1,613 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | 0.5V/µs | 1 MHz | - | 30 nA | 1 mV | 2.4mA (x4 Channels) | 25 mA | 36 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LMC662AIMIC CMOS 2 CIRCUIT 8SOIC |
2,450 | - |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 750µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
LMC6062IMIC CMOS 2 CIRCUIT 8SOIC |
2,410 | - |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.035V/µs | 100 kHz | - | 0.01 pA | 100 µV | 40µA (x2 Channels) | 35 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
LM6132BINIC OPAMP GP 2 CIRCUIT 8DIP |
3,702 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x2 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMV2011MFIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,279 | - |
|
Datasheet | LMV® | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 3 MHz | - | 3 pA | 0.12 µV | 930µA | 17 mA | 2.7 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | SOT-23-5 |
|
|
LM6144AIMXIC OPAMP GP 4 CIRCUIT 14SOIC |
4,622 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
LM7171BINIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
4,234 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Voltage Feedback | 1 | - | 4100V/µs | 200 MHz | 220 MHz | 2.7 µA | 200 µV | 6.5mA | 118 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMH6504MMIC VARIABLE GAIN 1 CIRC 8VSSOP |
2,303 | - |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Variable Gain | 1 | - | 1500V/µs | - | 150 MHz | 1.4 µA | 10 mV | 11mA | 80 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
LF411ACNIC OPAMP JFET 1 CIRCUIT 8DIP |
1,815 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 15V/µs | 4 MHz | - | 50 pA | 300 µV | 1.8mA | - | 10 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
