Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NJM4556ADIC OPAMP GP 2 CIRCUIT 8DIP |
1,320 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Not For New Designs | General Purpose | 2 | - | 3V/µs | 8 MHz | - | 50 nA | 500 µV | 8mA | 70 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
|
NJM5532MIC OPAMP GP 2 CIRCUIT 8DMP |
8,586 | - |
|
Datasheet | - | 8-SOIC (0.197", 5.00mm Width) | Tube | Active | General Purpose | 2 | - | 8V/µs | 10 MHz | - | 200 nA | 500 µV | 9mA | 38 mA | 6 V | 44 V | -20°C ~ 75°C | - | - | Surface Mount | 8-DMP |
|
|
NJM2068DIC OPAMP GP 2 CIRCUIT 8DIP |
4,734 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Not For New Designs | General Purpose | 2 | - | 6V/µs | 27 MHz | - | 150 nA | 300 µV | 5mA | - | 8 V | 36 V | -20°C ~ 75°C | - | - | Through Hole | 8-DIP |
|
|
NJM5532DIC OPAMP GP 2 CIRCUIT 8DIP |
54,985 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Not For New Designs | General Purpose | 2 | - | 8V/µs | 10 MHz | - | 200 nA | 500 µV | 9mA | 38 mA | 6 V | 44 V | -20°C ~ 75°C | - | - | Through Hole | 8-DIP |
|
|
NJM2732MIC OPAMP GP 2 CIRCUIT 8DMP |
1,375 | - |
|
Datasheet | - | 8-SOIC (0.197", 5.00mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 1 MHz | - | 50 nA | 1 mV | 580µA | - | 1.8 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DMP |
~~8.jpg "NJU77552RB1-TE1")
|
NJU77552RB1-TE1IC OPAMP GP 2 CIRCUIT 8TVSP |
1,610 | - |
|
Datasheet | - | 8-VSSOP, 8-MSOP (0.110", 2.80mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.8V/µs | 1.7 MHz | - | 1 pA | 1 mV | 50µA | 60 mA | 1.8 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-TVSP |
|
|
NJM2119MIC OPAMP GP 2 CIRCUIT 8DMP |
2,376 | - |
|
Datasheet | - | 8-SOIC (0.197", 5.00mm Width) | Tube | Active | General Purpose | 2 | - | 0.3V/µs | 1 MHz | - | 18 nA | 90 µV | 1mA | 40 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DMP |
|
NJU77903DL3H-TE2HIGH OUTPUT CURRENT, RAIL-TO-RAI |
2,894 | - |
|
Datasheet | - | TO-252-6, DPAK (5 Leads + Tab) | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 3.5V/µs | 1.5 MHz | - | 1 pA | 1 mV | 9.5mA | 375 mA | 6.8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | TO-252-5 |
|
NJM8830GM1-TE1ULTRALOW DISTORTION, ULTRALOW NO |
2,907 | - |
|
Datasheet | - | 8-SOIC (0.173", 4.40mm Width) Exposed Pad | Tape & Reel (TR) | Active | Audio | 2 | Rail-to-Rail | 30V/µs | 90 MHz | - | 150 nA | 500 µV | 6.5mA (x2 Channels) | 100 mA | 4 V | - | -40°C ~ 125°C | - | - | Surface Mount | 8-HSOP-M1 |
|
NJM2904CG-TE2IC OPAMP GP 2 CIRCUIT 8SOP |
9,557 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.6V/µs | - | - | 20 nA | 500 µV | - | 40 mA | 3 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
