Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NJM072MIC OPAMP JFET 2 CIRCUIT 8DMP |
2,529 | - |
|
Datasheet | - | 8-SOIC (0.197", 5.00mm Width) | Tube | Obsolete | J-FET | 2 | - | 13V/µs | 5 MHz | - | 30 pA | 3 mV | 3mA | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DMP |
|
NJM082DIC OPAMP JFET 2 CIRCUIT 8DIP |
2,089 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 13V/µs | 5 MHz | - | 30 pA | 5 mV | 3mA | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
|
|
NJM2082DIC OPAMP JFET 2 CIRCUIT 8DIP |
1,862 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 20V/µs | 5 MHz | - | 30 pA | 2 mV | 4mA | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
|
|
NJM4560DIC OPAMP GP 2 CIRCUIT 8DIP |
2,043 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 4V/µs | 10 MHz | - | 40 nA | 500 µV | 4.3mA | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
|
|
NJMOP-07DIC OPAMP GP 1 CIRCUIT 8DIP |
3,627 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.17V/µs | 500 kHz | - | 1.8 nA | 60 µV | 2.7mA | - | 6 V | 44 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
|
|
NJMOP-07MIC OPAMP GP 1 CIRCUIT 8DMP |
3,010 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | General Purpose | 1 | - | 0.17V/µs | 500 kHz | - | 1.8 nA | 60 µV | 2.7mA | - | 6 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DMP |
|
NJU7007F3-TE1IC OPAMP GP 1 CIRCUIT SC88A |
3,167 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.1V/µs | 200 kHz | - | 1 pA | 4 mV | 15µA | 15 µA | 1 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-88A |
|
|
NJU7021DIC OPAMP GP 1 CIRCUIT 8DIP |
1,807 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.4V/µs | 400 kHz | - | 1 pA | 10 mV | 150µA | - | 3 V | 16 V | -20°C ~ 75°C | - | - | Through Hole | 8-DIP |
|
|
NJU7051DIC OPAMP GP 1 CIRCUIT 8DIP |
2,533 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.05V/µs | 100 kHz | - | 1 pA | 2 mV | 15µA | - | 1 V | 16 V | -20°C ~ 75°C | - | - | Through Hole | 8-DIP |
|
NJU7074DIC CMOS 4 CIRCUIT 14DIP |
2,244 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1.1V/µs | 1 MHz | - | 1 pA | 2 mV | 600µA | - | 5 V | 16 V | -20°C ~ 75°C | - | - | Through Hole | 14-DIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
