Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SC2904VDR2IC OPAMP 8SOIC |
50,000 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | - | - | - | - | 45 nA | 2 mV | - | 40 mA | 3 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
SC2904VDR2GIC OPAMP GP 2 CIRCUIT 8SOIC |
2,120 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | - | - | - | 45 nA | 2 mV | - | 40 mA | 3 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MC34071ADR2GIC OPAMP GP 1 CIRCUIT 8SOIC |
1,956 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Single-Ended | 13V/µs | 4.5 MHz | - | 100 nA | 500 µV | 1.9mA | 30 mA | 3 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
NCS2002SN1T1IC OPAMP GP 1 CIRCUIT 6TSOP |
2,418 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.3V/µs | 900 kHz | - | 10 pA | 500 µV | 820µA | 128 mA | 0.9 V | 7 V | -40°C ~ 105°C | - | - | Surface Mount | 6-TSOP |
|
|
MC34071ADIC OPAMP GP 1 CIRCUIT 8SOIC |
1,223 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Single-Ended | 13V/µs | 4.5 MHz | - | 100 nA | 500 µV | 1.9mA | 30 mA | 3 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
NCV2904VDR2GIC OPAMP GP 2 CIRCUIT 8SOIC |
1,862 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.6V/µs | 1 MHz | - | 45 nA | 7 mV | 1.5mA (x2 Channels) | 40 mA | 3 V | 32 V | -40°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
TL062VDIC OPAMP JFET 2 CIRCUIT 8SOIC |
7,080 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 2 | - | 6V/µs | 2 MHz | - | 30 pA | 3 mV | 200µA (x4 Channels) | - | 36 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TL064CNIC OPAMP JFET 4 CIRCUIT 14DIP |
137,289 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x4 Channels) | 20 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
SC2902VDTBR2GIC OPAMP GP 14TSSOP |
4,640 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 14-TSSOP |
|
LMV301SN3T1GIC CMOS 1 CIRCUIT 5TSOP |
4,615 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | CMOS | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 3 pA | 1.7 mV | 200µA | 160 mA | 1.8 V | 5 V | - | - | - | Surface Mount | 5-TSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
