Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LF347MIC OPAMP JFET 4 CIRCUIT 14SOP |
3,522 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 7.2mA (x4 Channels) | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOP |
|
L272MIC OPAMP GP 2 CIRCUIT 8DIP |
2,087 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 300 nA | 15 mV | 8mA | 700 mA | 4 V | 28 V | -40°C ~ 85°C | - | - | Through Hole | 8-DIP |
|
KA324DIC OPAMP GP 4 CIRCUIT 14SOP |
2,872 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | - | - | - | 40 nA | 1.5 mV | 1mA | 40 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOP |
|
L272AD2TFIC OPAMP GP 2 CIRCUIT 16SOIC |
3,100 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 100 nA | 7 mV | 8mA | 700 mA | 4 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
L272D2IC OPAMP GP 2 CIRCUIT 16SOIC |
1,884 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 300 nA | 15 mV | 8mA | 700 mA | 4 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
L272AD2IC OPAMP GP 2 CIRCUIT 16SOIC |
3,121 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 100 nA | 7 mV | 8mA | 700 mA | 4 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LMV324AMTC14XIC OPAMP GP 4 CIRCUIT 14TSSOP |
4,951 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 1.5V/µs | 1.4 MHz | - | 1 nA | 1 mV | 100µA | 34 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
KF347IC OPAMP JFET 4 CIRCUIT 14MDIP |
2,395 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 7.2mA | - | 36 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-MDIP |
|
|
KA334IC OPAMP GP 2 CIRCUIT 8DIP |
4,120 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 300 nA | 15 mV | 8mA | 700 mA | 4 V | 28 V | -25°C ~ 85°C | - | - | Through Hole | 8-DIP |
|
FHP3230IMU8XIC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
4,419 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 110V/µs | 60 MHz | 170 MHz | 1.8 µA | 1 mV | 2.5mA (x2 Channels) | 100 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
