Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HFA1112IPZIC BUFFER 1 CIRCUIT 8DIP |
2,331 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 1 | - | 2400V/µs | - | 850 MHz | 25 µA | 8 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
CA5260MZIC OPAMP GP 2 CIRCUIT 8SOIC |
4,952 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 2 mV | 9mA (x2 Channels) | 45 mA | 4.5 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
HFA1110IBZIC BUFFER 1 CIRCUIT 8SOIC |
4,768 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Buffer | 1 | - | 1300V/µs | - | 750 MHz | 10 µA | 8 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ICL7650SCPDZIC OPAMP ZERO-DRIFT 1 CIRC 14DIP |
3,983 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Zero-Drift | 1 | - | 2.5V/µs | 2 MHz | - | 4 pA | 700 µV | 2mA | 30 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
CA3260AEZIC CMOS 2 CIRCUIT 8DIP |
4,612 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | CMOS | 2 | - | 10V/µs | 4 MHz | - | 5 pA | 2 mV | 9mA (x2 Channels) | 22 mA | 4 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
EL8170FSZ-T7IC INST AMP 1 CIRCUIT 8SOIC |
2,110 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.55V/µs | - | 192 kHz | 700 pA | 50 µV | 65µA | 32 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
EL8173FSZ-T7IC INST AMP 1 CIRCUIT 8SOIC |
3,715 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.55V/µs | - | 396 kHz | 700 pA | 200 µV | 65µA | 32 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
EL5263IYZ-T7IC OPAMP CFA 2 CIRCUIT 8MSOP |
3,245 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 4000V/µs | - | 500 MHz | 2 µA | 1.5 mV | 1.5mA (x2 Channels) | 100 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP |
|
EL2480CSZ-T13IC OPAMP CFA 4 CIRCUIT 14SOIC |
4,080 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 4 | - | 1200V/µs | - | 250 MHz | 16 µA | 2.5 mV | 3mA (x4 Channels) | 55 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
CA5260MZ96IC OPAMP GP 2 CIRCUIT 8SOIC |
1,664 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 2 mV | 9mA (x2 Channels) | 45 mA | 4.5 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
