Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISL28430FVZ-T7IC OPAMP GP 4 CIRCUIT 14TSSOP |
4,099 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 250 pA | 5 µV | 20µA (x4 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
EL5162IWZ-T7AIC OPAMP CFA 1 CIRCUIT 6SOT |
1,863 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 4000V/µs | - | 500 MHz | 2 µA | 1.5 mV | 1.5mA | 100 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 6-SOT |
|
EL5392ACUZ-T13IC OPAMP CFA 3 CIRCUIT 16QSOP |
4,184 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 3 | - | 2300V/µs | - | 600 MHz | 4 µA | 1 mV | 6mA (x3 Channels) | 120 mA | 5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
EL5161IWZ-T7IC OPAMP CFA 1 CIRCUIT SOT23-5 |
2,137 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 1700V/µs | - | 200 MHz | 5 µA | 1.6 mV | 750µA | - | 5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
EL5193ACWZ-T7IC AMP CFA SINGLE 300MHZ SOT23-6 |
1,514 | - |
|
Datasheet | - | SOT-23-6 | Cut Tape (CT) | Obsolete | Current Feedback | 1 | - | 2600V/µs | - | 300 MHz | 1 µA | 1 mV | 4mA | 120 mA | 5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 6-SOT |
|
ISL28110FBZ-T13IC OPAMP JFET 1 CIRCUIT 8SOIC |
1,750 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 20V/µs | 12.5 MHz | - | 2 pA | 300 µV | 2.55mA | 50 mA | 9 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
ISL28110FBZ-T7IC OPAMP JFET 1 CIRCUIT 8SOIC |
3,209 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 20V/µs | 12.5 MHz | - | 2 pA | 300 µV | 2.55mA | 50 mA | 9 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
ISL28533FVZ-T13IC OPAMP ZER-DRIFT 1CIRC 14TSSOP |
1,794 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.8V/µs | 2.3 MHz | - | 50 pA | 0.2 µV | 2.9mA | 45 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
EL5263IYZIC OPAMP CFA 2 CIRCUIT 8MSOP |
4,802 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 4000V/µs | - | 500 MHz | 2 µA | 1.5 mV | 1.5mA (x2 Channels) | 100 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP |
|
|
EL8102IWZ-T7IC AMP 500MHZ R-R SGL SOT23-6 |
3,987 | - |
|
Datasheet | - | SOT-23-6 | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
