Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMR934FV-GE2IC OPAMP GP 4 CIRCUIT 14SSOPB |
2,362 | - |
|
Datasheet | - | 14-LSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.35V/µs | 1.4 MHz | - | 5 nA | 1 mV | 250µA | 90 mA | 1.8 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SSOP-B |
|
BA4510F-E2IC OPAMP GP 2 CIRCUIT 8SOP |
2,496 | - |
|
Datasheet | - | 8-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 5V/µs | 10 MHz | - | 80 nA | 1 mV | 5mA | 10 mA | 2 V | 7 V | -20°C ~ 75°C | - | - | Surface Mount | 8-SOP |
|
BA4510FV-E2IC OPAMP GP 2 CIRCUIT 8SSOPB |
2,264 | - |
|
Datasheet | - | 8-LSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 5V/µs | 10 MHz | - | 80 nA | 1 mV | 5mA | 10 mA | 2 V | 7 V | -20°C ~ 75°C | - | - | Surface Mount | 8-SSOP-B |
|
BU7271SG-TRIC OPAMP GP 1 CIRCUIT 5SSOP |
2,773 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.05V/µs | 90 kHz | - | 1 pA | 1 mV | 8.6µA | 8 mA | 1.8 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 5-SSOP |
|
|
BU7291SG-TRIC OPAMP GP 1 CIRCUIT 5SSOP |
338 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 3V/µs | 2.8 MHz | - | 1 pA | 1 mV | 470µA | 16 mA | 2.4 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 5-SSOP |
|
LMR822FVJ-GE2LMR SERIES, LOW SUPPLY CURRENT O |
5,000 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 2V/µs | 5.5 MHz | - | 40 nA | 1 mV | 650µA | 45 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP-BJ |
|
BA4510FVM-GTRIC OPAMP GP 2 CIRCUIT 8MSOP |
135 | - |
|
Datasheet | - | 8-VSSOP, 8-MSOP (0.110", 2.80mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 5V/µs | 10 MHz | - | 80 nA | 1 mV | 5mA | - | 2 V | 7 V | -20°C ~ 75°C | - | - | Surface Mount | 8-MSOP |
|
|
BA2904YF-MGE2IC OPAMP GP 2 CIRCUIT 8SOP |
3,870 | - |
|
Datasheet | - | 8-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.2V/µs | 500 kHz | - | 20 nA | 2 mV | 500µA | 30 mA | 3 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOP |
|
|
BA2904YFV-MGE2IC OPAMP GP 2 CIRCUIT 8SSOPB |
1,750 | - |
|
Datasheet | - | 8-LSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.2V/µs | 500 kHz | - | 20 nA | 2 mV | 500µA | 30 mA | 3 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SSOP-B |
|
BD5291FVE-GTRINPUT/OUTPUT FULL SWING LOW INPU |
2,908 | - |
|
Datasheet | - | SOT-665 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2.5V/µs | 3.2 MHz | - | 1 pA | 100 µV | 650µA | 35 mA | 1.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 5-VSOF |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
