Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
BU7442SNUX-TRIC CMOS 2 CIRCUIT VSON008X2030 |
7,910 | - |
|
Datasheet | - | 8-UFDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | - | 0.3V/µs | 600 kHz | - | 1 pA | 1 mV | 100µA | 10 mA | 1.7 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | VSON008X2030 |
|
BU7465HFV-TRIC OPAMP GP 1 CIRCUIT 5HVSOF |
4,755 | - |
|
Datasheet | - | SOT-665 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1.2 MHz | - | 1 pA | 1 mV | 120µA | 18 mA | 1.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 5-HVSOF |
|
|
BU7465SHFV-TRIC OPAMP GP 1 CIRCUIT 5HVSOF |
5,973 | - |
|
Datasheet | - | SOT-665 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1.2 MHz | - | 1 pA | 1 mV | 120µA | 18 mA | 1.7 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 5-HVSOF |
|
LMR981G-GTRIC OPAMP GP 1 CIRCUIT 6SSOP |
2,840 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.42V/µs | 1.4 MHz | - | 5 nA | 1 mV | 85µA | 90 mA | 1.8 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 6-SSOP |
|
BU7294F-E2IC CMOS 4 CIRCUIT 14SOP |
2,461 | - |
|
Datasheet | - | 14-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 3V/µs | 2.8 MHz | - | 1 pA | 1 mV | 2mA | 16 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOP |
|
|
BU7444F-E2IC CMOS 4 CIRCUIT 14SOP |
2,468 | - |
|
Datasheet | - | 14-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Not For New Designs | CMOS | 4 | - | 0.3V/µs | 600 kHz | - | 1 pA | 1 mV | 200µA | 10 mA | 1.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOP |
|
LMR822FJ-GE2IC OPAMP GP 2 CIRCUIT SOP8J |
1,766 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 2V/µs | 5.5 MHz | - | 40 nA | 1 mV | 650µA | 45 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOP-J |
|
|
BU7487SF-E2IC CMOS 4 CIRCUIT 14SOP |
2,394 | - |
|
Datasheet | - | 14-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 10V/µs | 10 MHz | - | 1 pA | 1 mV | 6mA | 12 mA | 3 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SOP |
|
|
BU7294SF-E2IC CMOS 4 CIRCUIT 14SOP |
2,490 | - |
|
Datasheet | - | 14-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 3V/µs | 2.8 MHz | - | 1 pA | 1 mV | 2mA | 16 mA | 2.4 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SOP |
|
|
BU7255SHFV-TRIC CMOS 1 CIRCUIT 5HVSOF |
5,340 | - |
|
Datasheet | - | SOT-665 | Tape & Reel (TR) | Active | CMOS | 1 | Rail-to-Rail | 3.4V/µs | 4 MHz | - | 1 pA | 1 mV | 540µA | 8 mA | 2.4 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 5-HVSOF |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
