Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD824ARZ-14-REELIC OPAMP JFET 4 CIRCUIT 14SOIC |
4,935 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | Rail-to-Rail | 2V/µs | 2 MHz | 2 MHz | 4 pA | 500 µV | 560µA (x4 Channels) | 12 mA | 3 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
AD824ARZ-14IC OPAMP JFET 4 CIRCUIT 14SOIC |
1,527 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 4 | Rail-to-Rail | 2V/µs | 2 MHz | 2 MHz | 4 pA | 500 µV | 560µA (x4 Channels) | 12 mA | 3 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
AD824ARZ-14-REEL7IC OPAMP JFET 4 CIRCUIT 14SOIC |
846 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | Rail-to-Rail | 2V/µs | 2 MHz | 2 MHz | 4 pA | 500 µV | 560µA (x4 Channels) | 12 mA | 3 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LT1206CR#PBFIC OPAMP CFA 1 CIRCUIT 7DDPAK |
762 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tube | Active | Current Feedback | 1 | - | 900V/µs | - | 60 MHz | 10 µA | 3 mV | 20mA | 1.2 A | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | DDPAK-7 |
|
|
LT1206CR#TRPBFIC OPAMP CFA 1 CIRCUIT 7DDPAK |
418 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 900V/µs | - | 60 MHz | 10 µA | 3 mV | 20mA | 1.2 A | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | DDPAK-7 |
|
OP497GSZ-REELIC OPAMP GP 4 CIRCUIT 16SOIC |
681 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.15V/µs | 500 kHz | - | 60 pA | 80 µV | 525µA (x4 Channels) | 25 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
AD712KNZIC OPAMP JFET 2 CIRCUIT 8DIP |
3,130 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 2 | - | 20V/µs | - | 4 MHz | 25 pA | 300 µV | 5mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LTC6269HDD#PBFIC OPAMP JFET 2 CIRCUIT 10DFN |
1,873 | - |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tube | Active | J-FET | 2 | Rail-to-Rail | 400V/µs | 500 MHz | 350 MHz | 0.003 pA | 200 µV | 16.5mA (x2 Channels) | 90 mA | 3.1 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 10-DFN (3x3) |
|
ADA4930-1YCPZ-R2IC OPAMP DIFF 1 CIRCUIT 16LFCSP |
329 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Differential | 1 | Differential | 3400V/µs | - | 1.35 GHz | 23 µA | 150 µV | 34mA | 30 mA | 3.3 V | 5 V | -40°C ~ 105°C | - | - | Surface Mount | 16-LFCSP-VQ (3x3) |
|
|
OP470GSZ-REELIC OPAMP GP 4 CIRCUIT 16SOIC |
2,046 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 3V/µs | 6 MHz | - | 15 nA | 400 µV | 9mA | - | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
