Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD621BRZ-R7IC INST AMP 1 CIRCUIT 8SOIC |
1,206 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 1.2V/µs | - | 800 kHz | 500 pA | 50 µV | 900µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD621BRZIC INST AMP 1 CIRCUIT 8SOIC |
178 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | - | 800 kHz | 500 pA | 50 µV | 900µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LT1112MPS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
774 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 0.3V/µs | 750 kHz | - | 80 pA | 25 µV | 350µA (x2 Channels) | - | 2 V | 40 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LTC1053CSW#PBFIC OPAMP ZERO-DRIFT 4 CIRC 18SO |
322 | - |
|
Datasheet | - | 18-SOIC (0.295", 7.50mm Width) | Tube | Active | Chopper (Zero-Drift) | 4 | - | 4V/µs | 2.5 MHz | - | 15 pA | 0.5 µV | 1mA (x4 Channels) | - | 4.75 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 18-SO |
|
ADHV4702-1BCPZ-R7IC OPAMP GP 1 CIRCUIT 12LFCSP |
1,298 | - |
|
Datasheet | - | 12-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | General Purpose | 1 | - | 74V/µs | - | 10 MHz | 0.3 pA | 3 mV | 3mA | 20 mA | 24 V | 220 V | -40°C ~ 85°C | - | - | Surface Mount | 12-LFCSP (7x7) |
|
|
ADHV4702-1BCPZIC OPAMP GP 1 CIRCUIT 12LFCSP |
246 | - |
|
Datasheet | - | 12-WQFN Exposed Pad, CSP | Tray | Active | General Purpose | 1 | - | 74V/µs | - | 10 MHz | 0.3 pA | 150 µV | 3mA | 20 mA | 24 V | 220 V | -40°C ~ 85°C | - | - | Surface Mount | 12-LFCSP (7x7) |
|
AD524ARZ-16IC INST AMP 1 CIRCUIT 16SOIC |
1,422 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 1 MHz | 1 MHz | 50 nA | 250 µV | 3.5mA | - | 12 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
OP213ESZ-REEL7IC OPAMP GP 2 CIRCUIT 8SOIC |
1,502 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1.2V/µs | 3.4 MHz | - | 240 nA | 100 µV | - | 40 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OP213ESZIC OPAMP GP 2 CIRCUIT 8SOIC |
838 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1.2V/µs | 3.4 MHz | - | 240 nA | 100 µV | - | 40 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8610BRZ-REEL7IC OPAMP JFET 1 CIRCUIT 8SOIC |
1,170 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 60V/µs | 25 MHz | - | 3 pA | 45 µV | 3mA | 45 mA | 10 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
