Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8007AKSZ-REEL7IC OPAMP CFA 1 CIRCUIT SC70-5 |
6,407 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 1000V/µs | - | 650 MHz | 4 µA | 500 µV | 9mA | 130 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
LTC6241HS8#TRPBFIC CMOS 2 CIRCUIT 8SO |
3,201 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.5 pA | 100 µV | 2.5mA (x2 Channels) | 30 mA | 2.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LTC6255IDC#TRMPBFIC OPAMP GP 1 CIRCUIT 6DFN |
2,358 | - |
|
Datasheet | - | 6-WFDFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | General Purpose | 1 | Rail-to-Rail | 1.8V/µs | 6.5 MHz | 4.5 MHz | 5 nA | 100 µV | 65µA | 35 mA | 1.8 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 6-DFN (2x2) |
|
AD8553ARMZIC INST AMP 1 CIRCUIT 10MSOP |
294 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | Instrumentation | 1 | Rail-to-Rail | - | 1 MHz | - | 400 pA | 120 µV | 1.1mA | 35 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
AD8417WHRMZIC CURRENT SENSE 1 CIRCUIT 8MSOP |
209 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Current Sense | 1 | - | 1V/µs | - | 250 kHz | 130 µA | 200 µV | 4.1mA | - | 2.7 V | 5.5 V | -40°C ~ 150°C | Automotive | - | Surface Mount | 8-MSOP |
|
|
AD8206YRZIC OPAMP DIFF 1 CIRCUIT 8SOIC |
241 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | - | 0.5V/µs | - | 100 kHz | - | 2 mV | 2mA | - | 4.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LT1001CN8#PBFIC OPAMP GP 1 CIRCUIT 8DIP |
390 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 0.25V/µs | 800 kHz | - | 700 pA | 18 µV | - | - | 6 V | 36 V | 0°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
|
AD8551ARMZIC OPAMP ZERO-DRIFT 1 CIRC 8MSOP |
245 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 0.4V/µs | 1.5 MHz | - | 10 pA | 1 µV | 850µA | 30 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
ADA4622-1ARZ-R7IC OPAMP JFET 1 CIRCUIT 8SOIC |
2,449 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 23V/µs | 8 MHz | 15.5 MHz | 2 pA | 400 µV | 715µA | 20 mA | 5 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8662ARZ-REEL7IC CMOS 2 CIRCUIT 8SOIC |
1,803 | - |
|
Datasheet | DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 3.5V/µs | 4 MHz | - | 0.3 pA | 50 µV | 1.25mA (x2 Channels) | 140 mA | 5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
