Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OP191GSZIC OPAMP GP 1 CIRCUIT 8SOIC |
833 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.5V/µs | 3 MHz | - | 30 nA | 80 µV | 260µA | 16 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8557ARZ-REEL7IC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
2,453 | - |
|
Datasheet | DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | - | - | 2 MHz | - | 18 nA | 2 µV | 1.8mA | 55 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LT1990AHS8#PBFIC OPAMP DIFF 1 CIRCUIT 8SO |
3,637 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | Rail-to-Rail | 0.55V/µs | - | 105 kHz | - | 900 µV | 140µA | 22 mA | 2.7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
OP113FSZIC OPAMP GP 1 CIRCUIT 8SOIC |
1,846 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 1.2V/µs | 3.4 MHz | - | 240 nA | 150 µV | 3mA | 40 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8012ARMZIC OPAMP CFA 2 CIRCUIT 8MSOP |
836 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Current Feedback | 2 | - | 2250V/µs | 75 MHz | 350 MHz | 3 µA | 1.5 mV | 1.7mA (x2 Channels) | 125 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8012ARZIC OPAMP CFA 2 CIRCUIT 8SOIC |
212 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 2 | - | 2250V/µs | 75 MHz | 350 MHz | 3 µA | 1.5 mV | 1.7mA (x2 Channels) | 125 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LT1793ACS8#PBFIC OPAMP JFET 1 CIRCUIT 8SO |
527 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 1 | - | 3.4V/µs | 4.2 MHz | - | 3 pA | 250 µV | 4.2mA | - | 9 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LT6231IDD#PBFIC OPAMP GP 2 CIRCUIT 8DFN |
1,057 | - |
|
Datasheet | LT® | 8-WFDFN Exposed Pad | Tube | Active | General Purpose | 2 | Rail-to-Rail | 70V/µs | 215 MHz | - | 5 µA | 450 µV | 3.3mA (x2 Channels) | 30 mA | 3 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
LT1804IS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
582 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 100V/µs | 83 MHz | - | 2.5 µA | 1.5 mV | 2.5mA (x2 Channels) | 50 mA | 2.3 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LTC6078AIMS8#PBFIC CMOS 2 CIRCUIT 8MSOP |
480 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.05V/µs | 750 kHz | - | 0.2 pA | 20 µV | 55µA (x2 Channels) | 25 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
