Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1229CS8#PBFIC OPAMP CFA 2 CIRCUIT 8SO |
154 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 2 | - | 700V/µs | 100 MHz | 100 MHz | 10 µA | 3 mV | 6mA (x2 Channels) | 125 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1167CS8-1#PBFIC INST AMP 1 CIRCUIT 8SO |
1,982 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | 1 MHz | - | 80 pA | 20 µV | 900µA | - | 4.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
AD8044ARZ-14IC OPAMP VFB 4 CIRCUIT 14SOIC |
213 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 4 | Rail-to-Rail | 190V/µs | - | 160 MHz | 2 µA | 1.4 mV | 11.5mA | 30 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LTC6090IS8E#TRPBFIC OPAMP GP 1 CIRCUIT 8SOIC |
5,143 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 21V/µs | 12 MHz | - | 3 pA | 330 µV | 2.8mA | - | 9.5 V | 140 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC-EP |
|
|
LTC6090IS8E-5#PBFIC OPAMP GP 1 CIRCUIT 8SOIC |
3,833 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tube | Active | General Purpose | 1 | Rail-to-Rail | 37V/µs | 24 MHz | - | 3 pA | 330 µV | 2.8mA | 90 mA | 9.5 V | 140 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC-EP |
|
LT6222IGN#PBFIC OPAMP GP 4 CIRCUIT 16SSOP |
544 | - |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 20V/µs | 60 MHz | - | 250 nA | 700 µV | 900µA (x4 Channels) | 50 mA | 2.2 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
|
LTC6268HS8-10#PBFIC OPAMP JFET 1 CIRCUIT 8SO |
310 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 1 | Rail-to-Rail | 1500V/µs | 4 GHz | - | 0.003 pA | 200 µV | 16.5mA | 90 mA | 3.1 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LT1352CN8#PBFIC VOLTAGE FEEDBACK 2 CIRC 8DIP |
121 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 2 | - | 200V/µs | 3 MHz | - | 20 nA | 200 µV | 250µA (x2 Channels) | 14 mA | 5 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
ADA4897-1SRJZ-EPR7IC OPAMP GP 1 CIRCUIT SOT23-6 |
1,874 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 120V/µs | - | 230 MHz | 11 µA | 28 µV | 3mA | 135 mA | 3 V | 10 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
LT6370AHS8E#PBFIC INST AMP 1 CIRCUIT 8SOIC |
107 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tube | Active | Instrumentation | 1 | Single-Ended | 11V/µs | - | 3.1 MHz | 100 pA | 9 µV | 2.65mA | 55 mA | 4.75 V | 35 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC-EP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
