Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6373IDFM#PBFIC INST AMP 1 CIRCUIT 12DFN |
2,723 | - |
|
Datasheet | - | 12-WFDFN Exposed Pad | Tube | Active | Instrumentation | 1 | Rail-to-Rail | 12V/µs | - | 7.5 MH | 2 pA | 92 µV | 4.4mA | 47 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount, Wettable Flank | 12-DFN (4x4) |
|
LT1167IS8-1#PBFIC INST AMP 1 CIRCUIT 8SO |
656 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | 1 MHz | - | 80 pA | 20 µV | 900µA | - | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
AD8024ARZIC OPAMP CFA 4 CIRCUIT 16SOIC |
990 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 4 | - | 390V/µs | - | 200 MHz | 1 µA | 2 mV | 16mA | 50 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LTC1152IN8#PBFIC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
4,718 | - |
|
Datasheet | C-Load™ | 8-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 0.5V/µs | 700 kHz | - | 10 pA | 1 µV | 2.2mA | - | 2.7 V | 14 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LT1630IS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
526 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 10V/µs | 30 MHz | - | 550 nA | 220 µV | 4.1mA (x2 Channels) | 70 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
LT1124AIS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
152 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 4.5V/µs | 12.5 MHz | - | 7 nA | 20 µV | 2.3mA (x2 Channels) | - | 8 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
LT1169CN8#PBFIC OPAMP JFET 2 CIRCUIT 8DIP |
2,423 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 2 | - | 4.2V/µs | 5.3 MHz | - | 4 pA | 600 µV | 5.3mA (x2 Channels) | - | 9 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
ADA4084-4ARUZ-RLIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,879 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 4.6V/µs | 15.9 MHz | 13.9 MHz | 140 nA | 60 µV | 625µA (x4 Channels) | 30 mA | 3 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AD744JNZIC OPAMP JFET 1 CIRCUIT 8DIP |
173 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 75V/µs | - | 13 MHz | 30 pA | 300 µV | 3.5mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
OP213FPZIC OPAMP GP 2 CIRCUIT 8DIP |
155 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1.2V/µs | 3.4 MHz | - | 600 nA | 250 µV | - | 40 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
