Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC2058IS8E#PBFIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
313 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tube | Active | Zero-Drift | 2 | Rail-to-Rail | 1.6V/µs | 2.5 MHz | - | 30 pA | 0.5 µV | 1mA (x2 Channels) | 36 mA | 4.75 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC-EP |
|
LTC6240HVHS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
237 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.5 pA | 60 µV | 2.7mA | 35 mA | 2.8 V | 11 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LTC6115IMS#PBFIC CURR SENSE 2 CIRCUIT 12MSOP |
104 | - |
|
Datasheet | - | 12-TSSOP (0.118", 3.00mm Width) | Tube | Active | Current Sense | 2 | Rail-to-Rail | 0.06V/µs | 530 kHz | 200 kHz | 85 nA | 85 µV | 400µA (x2 Channels) | 27 mA | - | - | -40°C ~ 85°C | - | - | Surface Mount | 12-MSOP |
|
ADA4691-4ACPZ-R2IC OPAMP GP 4 CIRCUIT 16LFCSP |
4,289 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 1.3V/µs | 3.6 MHz | - | 0.5 pA | 500 µV | 180µA (x4 Channels) | 55 mA | 2.7 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP (3x3) |
|
|
AD8418AWHRZ-RLIC CURRENT SENSE 1 CIRCUIT 8SOIC |
4,134 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 250 kHz | 130 µA | - | 4.1mA | - | 2.7 V | 5.5 V | -40°C ~ 150°C | Automotive | - | Surface Mount | 8-SOIC |
|
AD8418AWHRMZ-RLIC CURRENT SENSE 1 CIRCUIT 8MSOP |
3,792 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 250 kHz | 130 µA | - | 4.1mA | - | 2.7 V | 5.5 V | -40°C ~ 150°C | Automotive | - | Surface Mount | 8-MSOP |
|
|
LT6200CS8-10#PBFIC OPAMP GP 1 CIRCUIT 8SO |
130 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 450V/µs | 1.6 GHz | - | 23 µA | 2.5 mV | 20mA | - | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1396CS8#PBFIC OPAMP CFA 2 CIRCUIT 8SO |
653 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 2 | - | 800V/µs | - | 400 MHz | 10 µA | 1 mV | 4.6mA (x2 Channels) | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
AD8627AKSZ-REELIC OPAMP JFET 1 CIRCUIT SC70-5 |
2,629 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 5V/µs | 5 MHz | - | 0.25 pA | 350 µV | 710µA | 15 mA | 5 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
LTC6101HVAIMS8#PBFIC CURRENT SENSE 1 CIRCUIT 8MSOP |
934 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Current Sense | 1 | - | - | 200 kHz | - | 100 nA | 85 µV | 350µA | 1 mA | 5 V | 100 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
