Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4891-3WARUZ-R7IC CMOS 3 CIRCUIT 14TSSOP |
660 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 3 | Rail-to-Rail | 170V/µs | 105 MHz | 220 MHz | 2 pA | 2.5 mV | 4.4mA (x3 Channels) | 125 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AD8655WARMZ-RLIC OPAMP GP 1 CIRCUIT 8MSOP |
2,499 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 11V/µs | 28 MHz | - | 1 pA | 50 µV | 3.7mA | 220 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | - | Surface Mount | 8-MSOP |
|
LT1784CS6#TRPBFIC OPAMP GP 1 CIRCUIT TSOT23-6 |
4,790 | - |
|
Datasheet | Over-The-Top® | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2.2V/µs | 2.6 MHz | - | 250 nA | 1.6 mV | 750µA | 27 mA | 2.5 V | 18 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-6 |
|
LTC6084HDD#PBFIC CMOS 2 CIRCUIT 10DFN |
251 | - |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.5V/µs | 1.5 MHz | - | 1 pA | 300 µV | 110µA (x2 Channels) | 12.5 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
AD8236ARMZ-RLIC INST AMP 1 CIRCUIT 8MSOP |
2,118 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 0.011V/µs | - | 23 kHz | 1 pA | 3.5 mV | 33µA | 6 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
AD8293G80BRJZ-R7IC INST AMP 1 CIRCUIT SOT23-8 |
2,275 | - |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | - | - | 500 Hz | 400 pA | 9 µV | 1mA | 35 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
LT1722IS8#PBFIC VOLTAGE FEEDBACK 1 CIRC 8SO |
3,098 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | - | 70V/µs | 200 MHz | - | 40 nA | 100 µV | 3.7mA | 50 mA | 5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
AD8666WARZ-R7IC OPAMP GP 2 CIRCUIT 8SOIC |
2,763 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 3.5V/µs | 4 MHz | - | 0.2 pA | 600 µV | 1.15mA (x2 Channels) | 140 mA | 5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
ADA4851-4WYRUZ-R7IC OPAMP VFB 4 CIRCUIT 14TSSOP |
703 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 4 | Rail-to-Rail | 375V/µs | 70 MHz | 105 MHz | 2.2 µA | 600 µV | 2.9mA (x4 Channels) | 83 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
LT6013CS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
1,871 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 1.4 MHz | - | 100 pA | 25 µV | 200µA | 20 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
