Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD611KHIC OPAMP GP 1 CIRCUIT TO99 |
5,997 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 13V/µs | - | 2 MHz | 10 pA | 250 µV | 1.8mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99 |
|
AD8571ARIC OPAMP CHOPPER R-R 30MA 8SOIC |
5,635 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | Rail-to-Rail | 0.4V/µs | 1.5 MHz | - | 10 pA | 1 µV | 850µA | 30 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8604ARUIC OPAMP GP CMOS 8.4MHZ 14TSSOP |
740 | - |
|
Datasheet | DigiTrim® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 6V/µs | 8.4 MHz | - | 0.2 pA | 80 µV | 750µA (x4 Channels) | 50 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
AD8027AR-REELIC OPAMP R-R LDIST LN LP 8SOIC |
6,966 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 100V/µs | - | 190 MHz | 4 µA | 200 µV | 6.5mA | 120 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OP492GS-REEL7IC OPAMP GP 4 CIRCUIT 14SOIC |
2,055 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | 4V/µs | 4 MHz | - | 375 nA | 1.4 mV | 1mA (x4 Channels) | 10.5 mA | 4.5 V | 33 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
PM1008GPIC OPAMP GP 1 CIRCUIT 8DIP |
10,278 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.2V/µs | 500 kHz | - | 40 pA | 40 µV | 380µA | - | 4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
OP01CJIC OPAMP GP 1 CIRCUIT TO99-8 |
2,342 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 18V/µs | - | 2.5 MHz | 25 nA | 2 mV | - | - | 10 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
AD8031BNIC OPAMP VF R-R LP LDIST 8DIP |
39,341 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 35V/µs | - | 80 MHz | 450 nA | 500 µV | 900µA | 15 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OP162GPIC OPAMP GP 1 CIRCUIT 8DIP |
26,133 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 13V/µs | 15 MHz | - | 260 nA | 45 µV | 550µA | 30 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
|
AD611JH/+IC OPAMP GP 1 CIRCUIT TO99 |
154 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 13V/µs | - | 2 MHz | 25 pA | 250 µV | 1.8mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
