Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8682ARZ-REEL7IC OPAMP JFET 2 CIRCUIT 8SOIC |
4,806 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 9V/µs | 3.5 MHz | - | 6 pA | 350 µV | 210µA (x2 Channels) | 12 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ADA4528-2TCPZ-EPR7IC OPAMP ZERO-DRIFT 2CIRC 8LFCSP |
3,965 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Zero-Drift | 2 | Rail-to-Rail | 0.5V/µs | 3.4 MHz | 6.5 MHz | 125 pA | 0.3 µV | 1.5mA (x2 Channels) | 40 mA | 2.2 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-LFCSP-WD (3x3) |
|
AD8369ARUIC AMP VGA 16TSSOP |
3,884 | - |
|
Datasheet | X-AMP® | 16-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Variable Gain | 1 | - | 1200V/µs | - | 600 MHz | 160 µA | - | 37mA | - | 3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-TSSOP |
|
OP495GS-REELIC OPAMP GP 4 CIRCUIT 16SOIC |
4,408 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.03V/µs | 75 kHz | - | 7 nA | 300 µV | - | 25 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 16-SOIC |
|
LTC6256HTS8#TRPBFIC OPAMP GP 2 CIRCUIT TSOT23-8 |
3,492 | - |
|
Datasheet | - | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 1.8V/µs | 6.5 MHz | 4.5 MHz | 5 nA | 100 µV | 65µA (x2 Channels) | 35 mA | 1.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-8 |
|
AD8555ACP-R2IC AMP CHOPPER 2MHZ 10MA 16LFCSP |
4,750 | - |
|
Datasheet | DigiTrim® | 16-VQFN Exposed Pad, CSP | Bulk | Obsolete | Chopper (Zero-Drift) | 1 | - | 1.2V/µs | 2 MHz | - | 16 nA | 2 µV | 2mA | 10 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-VQ (4x4) |
|
ADA4627-1ACPZ-R2IC OPAMP JFET 1 CIRCUIT 8LFCSP |
1,679 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 1 | - | 84V/µs | 19 MHz | - | 1 pA | 120 µV | 7mA | 45 mA | 10 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
|
AD745JR-16-REELIC OPAMP BIFET 20MHZ ULN 16SOIC |
5,751 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | J-FET | 1 | - | 12.5V/µs | 20 MHz | 20 MHz | 150 pA | 250 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LT1724IS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
2,027 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 70V/µs | 200 MHz | - | 40 nA | 100 µV | 3.7mA (x4 Channels) | 50 mA | 5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
AD8036ANIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
3,493 | - |
|
Datasheet | CLAMPIN™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1200V/µs | - | 240 MHz | 4 µA | 2 mV | 20.5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
