Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD843BHIC OPAMP GP 34MHZ 50MA TO8-12 |
1,617 | - |
|
Datasheet | - | TO-8 Style, 12 Leads | Bulk | Obsolete | General Purpose | 1 | - | 250V/µs | 34 MHz | - | 40 pA | 500 µV | 12mA | 50 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-8-12 |
|
AD648SQ/883BIC OPAMP JFET 2 CIRCUIT 8CERDIP |
13,778 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 1.8V/µs | 1 MHz | 1 MHz | 5 pA | 750 µV | 340µA (x2 Channels) | 15 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
AD8037ARZ-REEL7IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,182 | - |
|
Datasheet | CLAMPIN™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1500V/µs | - | 270 MHz | 3 µA | 2 mV | 18.5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD585JP-REEL7IC PREC SAMPLE/HOLD AMP 20-PLCC |
750 | - |
|
Datasheet | * | 20-LCC (J-Lead) | Bulk | Obsolete | Sample and Hold | 1 | - | 10V/µs | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 20-PLCC (9x9) |
|
OP290ARC/883CIC OPAMP GP 2 CIRCUIT 20CLCC |
612 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 2 | - | 0.012V/µs | 20 kHz | - | 4 nA | 125 µV | 25µA (x2 Channels) | - | 1.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD845JRZ-16-REELIC OPAMP JFET 1 CIRCUIT 16SOIC |
3,521 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 100V/µs | 16 MHz | - | 750 pA | 700 µV | 10mA | 50 mA | 9.5 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
5962-8770602PAIC OPAMP JFET 1 CIRCUIT 8CERDIP |
838 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 50V/µs | 28 MHz | - | 30 pA | 400 µV | 4.6mA | - | 44 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
AD625AEIC INST AMP 1 CIRCUIT 20CLCC |
503 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | Instrumentation | 1 | - | 5V/µs | 25 MHz | 650 kHz | 30 nA | 50 µV | 3.5mA | - | 12 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD648SH/883BIC OPAMP JFET 2 CIRCUIT 8SOIC |
1,564 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 2 | - | 1.8V/µs | 1 MHz | 1 MHz | 5 pA | 750 µV | 340µA (x2 Channels) | 15 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LT1207CS#PBFIC OPAMP CFA 2 CIRCUIT 16SO |
2,736 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 900V/µs | - | 60 MHz | 10 µA | 3 mV | 20mA (x2 Channels) | 1.2 A | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
