Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8634HRZNIC OPAMP GP 2 CIRCUIT 8SOIC |
1,195 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 4.9V/µs | 9.7 MHz | 11 MHz | 45 nA | 250 µV | 1.1mA (x2 Channels) | 65 mA | 3 V | 30 V | -40°C ~ 175°C | - | - | Surface Mount | 8-SOIC |
|
AD526ADIC OPAMP PGA 1 CIRCUIT 16CDIP |
3,652 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Programmable Gain | 1 | - | 24V/µs | - | 4 MHz | 50 pA | 250 µV | 10mA | 10 mA | 9 V | 33 V | -40°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
AD844SQIC OPAMP CFA 1 CIRCUIT 8CERDIP |
1,921 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Current Feedback | 1 | - | 2000V/µs | - | 60 MHz | 200 pA | 50 µV | 6.5mA | 80 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
AD585SQ/883BIC SAMPL/HOLD 1 CIRCUIT 14CERDIP |
1,648 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | Sample and Hold | 1 | - | 10V/µs | - | 2 MHz | 2 nA | 2 mV | 10mA | 50 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
LT1813DDD#PBFIC VOLTAGE FEEDBACK 2 CIRC 8DFN |
4,250 | - |
|
Datasheet | LT® | 8-WFDFN Exposed Pad | Tube | Active | Voltage Feedback | 2 | - | 750V/µs | 100 MHz | 200 MHz | 900 nA | 500 µV | 3mA (x2 Channels) | 60 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LTC6085CDHC#PBFIC CMOS 4 CIRCUIT 16DFN |
3,220 | - |
|
Datasheet | - | 16-WFDFN Exposed Pad | Tube | Active | CMOS | 4 | Rail-to-Rail | 0.5V/µs | 1.5 MHz | - | 1 pA | 300 µV | 110µA (x4 Channels) | 12.5 mA | 2.5 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-DFN (5x3) |
|
LT1999CMS8-50F#PBFIC CURRENT SENSE 1 CIRCUIT 8MSOP |
1,457 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Current Sense | 1 | - | 3V/µs | - | 1.2 MHz | 137.5 µA | 500 µV | 5.8mA | 40 mA | 4.5 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-MSOP |
|
|
LT6013AIS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
2,691 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 1.4 MHz | - | 100 pA | 20 µV | 200µA | 20 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
LT6370IMS8#TRPBFIC INST AMP 1 CIRCUIT 8MSOP |
1,301 | - |
|
Datasheet | LT® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 11V/µs | - | 19 kHz | 100 pA | 15 µV | 2.65mA | 55 mA | 4.75 V | 35 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LTC6242HGN#TRPBFIC CMOS 4 CIRCUIT 16SSOP |
3,487 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.5 pA | 60 µV | 1.8mA (x4 Channels) | 30 mA | 2.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 16-SSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
