Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6101VHVBIS5#TRPBFIC CURR SENSE 1 CIRCUIT TSOT23-5 |
1,512 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 100 nA | 150 µV | 200µA | 1 mA | 5 V | 100 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
LT1397CGN#TRPBFIC OPAMP CFA 4 CIRCUIT 16SSOP |
3,717 | - |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 4 | - | 800V/µs | - | 400 MHz | 10 µA | 1 mV | 4.6mA (x4 Channels) | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SSOP |
|
AD8605ART-REEL7IC OPAMP GP R-R CMOS LN SOT23-5 |
2,010 | - |
|
Datasheet | DigiTrim® | SC-74A, SOT-753 | Cut Tape (CT) | Obsolete | General Purpose | 1 | Rail-to-Rail | 5V/µs | 10 MHz | - | 0.2 pA | 80 µV | 1mA | 80 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LT1806CS8#TRPBFIC OPAMP GP 1 CIRCUIT 8SO |
4,272 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 140V/µs | 325 MHz | - | 5 µA | 100 µV | 11mA | - | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LTC2057HVIS8#TRPBFIC OPAMP ZER-DRIFT 1CIRC 8SO |
3,688 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.45V/µs | 1.5 MHz | - | 30 pA | 0.5 µV | 900µA | - | 4.75 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LTC6911CMS-2#TRPBFIC OPAMP PGA 2 CIRCUIT 10MSOP |
4,847 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Programmable Gain | 2 | Rail-to-Rail | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 10-MSOP |
|
|
AD8028ARZ-REELIC OPAMP GP 2 CIRCUIT 8SOIC |
3,965 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 100V/µs | - | 190 MHz | 4 µA | 200 µV | 6.5mA (x2 Channels) | 120 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OP15GHIC OPAMP JFET 1 CIRCUIT TO5 |
4,257 | - |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | J-FET | 1 | - | 9V/µs | 5.4 MHz | - | 60 pA | 500 µV | 2.8mA | - | 20 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | TO-5 |
|
|
OP16GHIC OPAMP JFET 1 CIRCUIT TO5 |
3,633 | - |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | J-FET | 1 | - | 16V/µs | 7.2 MHz | - | 60 pA | 500 µV | 4.8mA | - | 20 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | TO-5 |
|
LTC2065IUD#TRPBFIC OPAMP ZER-DRIFT 4CIRC 16QFN |
3,444 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Zero-Drift | 4 | Rail-to-Rail | 0.0035V/µs | 20 kHz | - | 3 pA | 1 µV | 1.4µA (x4 Channels) | 51 mA | 1.7 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (3x3) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
