Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8027ART-REEL7IC OPAMP R-R LDIST LN LP SOT23-6 |
1,518 | - |
|
Datasheet | - | SOT-23-6 | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 100V/µs | - | 190 MHz | 4 µA | 200 µV | 6.5mA | 120 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
AD8027ART-R2IC OPAMP R-R LDIST LN LP SOT23-6 |
4,209 | - |
|
Datasheet | - | SOT-23-6 | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 100V/µs | - | 190 MHz | 4 µA | 200 µV | 6.5mA | 120 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
AD8039ART-REEL7IC OPAMP VF DUAL LP LN SOT23-8 |
4,405 | - |
|
Datasheet | - | SOT-23-8 | Cut Tape (CT) | Obsolete | Voltage Feedback | 2 | - | 425V/µs | - | 350 MHz | 400 nA | 500 µV | 1mA (x2 Channels) | - | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
LTC6253HMS-7#TRPBFIC OPAMP GP 2 CIRCUIT 10MSOP |
2,852 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 500V/µs | 2 GHz | 400 MHz | 1.4 µA | 50 µV | 4.25mA (x2 Channels) | 100 mA | 2.5 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
LT1793IS8#TRPBFIC OPAMP JFET 1 CIRCUIT 8SO |
4,780 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 3.4V/µs | 4.2 MHz | - | 4 pA | 250 µV | 4.2mA | - | 9 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LTC6242HVCDHC#TRPBFIC CMOS 4 CIRCUIT 16DFN |
3,015 | - |
|
Datasheet | - | 16-WFDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.5 pA | 60 µV | 2.5mA (x4 Channels) | 30 mA | 2.8 V | 11 V | 0°C ~ 70°C | - | - | Surface Mount | 16-DFN (5x3) |
|
LT6238CGN#TRPBFIC OPAMP GP 4 CIRCUIT 16SSOP |
2,319 | - |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 70V/µs | 215 MHz | 90 MHz | 5 µA | 350 µV | 3.15mA (x4 Channels) | 30 mA | 3 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SSOP |
|
LTC1049CHIC OPAMP ZER-DRIFT 1CIRC TO5 |
1,404 | - |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | Chopper (Zero-Drift) | 1 | - | 0.8V/µs | 800 kHz | - | 15 pA | 2 µV | 200µA | - | 4.75 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | TO-5 |
|
|
LTC1050CHIC OPAMP ZER-DRIFT 1CIRC TO5 |
2,583 | - |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | Chopper (Zero-Drift) | 1 | - | 4V/µs | 2.5 MHz | - | 10 pA | 0.5 µV | 1mA | - | 4.75 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | TO-5 |
|
LT1881IN8#PBFIC OPAMP GP 2 CIRCUIT 8DIP |
1,151 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 850 kHz | - | 150 pA | 30 µV | 850µA (x2 Channels) | 40 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
