Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT6202IS5#TRPBFIC OPAMP GP 1 CIRCUIT TSOT23-5 |
3,599 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 25V/µs | 100 MHz | - | 3.8 µA | 2.6 mV | 2.8mA | 40 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
|
LT1880IS5#TRMPBFIC OPAMP GP 1 CIRCUIT TSOT23-5 |
28,955 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.55V/µs | 1.1 MHz | - | 150 pA | 40 µV | 1.5mA | 25 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
LT1055S8#TRPBFIC OPAMP JFET 1 CIRCUIT 8SO |
4,745 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 12V/µs | 4.5 MHz | - | 30 pA | 500 µV | 2.8mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
AD8475ARMZ-R7IC OPAMP DIFF 1 CIRCUIT 10MSOP |
2,230 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 50V/µs | - | 150 MHz | - | - | 3mA | 110 mA | 3 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
|
AD8475ARMZIC OPAMP DIFF 1 CIRCUIT 10MSOP |
852 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | Differential | 1 | Differential, Rail-to-Rail | 50V/µs | - | 150 MHz | - | - | 3mA | 110 mA | 3 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
AD711JNZIC OPAMP JFET 1 CIRCUIT 8DIP |
190 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 20V/µs | - | 4 MHz | 15 pA | 300 µV | 2.5mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LT1490CS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
17,446 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.07V/µs | 200 kHz | - | 4 nA | 250 µV | 40µA (x2 Channels) | 25 mA | 2 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
LT1990ACS8#TRPBFIC OPAMP DIFF 1 CIRCUIT 8SO |
10,803 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Rail-to-Rail | 0.55V/µs | - | 105 kHz | - | 900 µV | 140µA | 22 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1990ACS8#PBFIC OPAMP DIFF 1 CIRCUIT 8SO |
5,927 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | Rail-to-Rail | 0.55V/µs | - | 105 kHz | - | 900 µV | 140µA | 22 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1490CS8#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
3,326 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.07V/µs | 200 kHz | - | 4 nA | 250 µV | 40µA (x2 Channels) | 25 mA | 2 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
