Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8001ARZ-REELIC OPAMP CFA 1 CIRCUIT 8SOIC |
3,847 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 1200V/µs | - | 715 MHz | 5 µA | 2 mV | 5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OP462GSZ-REELIC OPAMP GP 4 CIRCUIT 14SOIC |
4,824 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 13V/µs | 15 MHz | - | 260 nA | 45 µV | 550µA (x4 Channels) | 30 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
LT6201CDD#TRPBFIC BUFFER 2 CIRCUIT 8DFN |
2,911 | - |
|
Datasheet | LT® | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Buffer | 2 | Rail-to-Rail | 50V/µs | 165 MHz | - | 8 µA | 2.5 mV | 20mA (x2 Channels) | 90 mA | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
AD8554ARZ-REELIC OPAMP ZERO-DRIFT 4CIRC 14SOIC |
1,056 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 4 | Rail-to-Rail | 0.4V/µs | 1.5 MHz | - | 10 pA | 1 µV | 850µA (x4 Channels) | 30 mA | 2.7 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
LT1724CS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
4,981 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 70V/µs | 200 MHz | - | 40 nA | 100 µV | 3.7mA (x4 Channels) | 50 mA | 5 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
|
LT1113CS8#TRPBFIC OPAMP JFET 2 CIRCUIT 8SO |
3,263 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 3.9V/µs | 5.6 MHz | - | 300 pA | 550 µV | 5.3mA (x2 Channels) | - | 9 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
LT1012IS8#TRPBFIC OPAMP GP 1 CIRCUIT 8SO |
4,593 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 0.2V/µs | - | - | 25 pA | 8 µV | 380µA | - | 2.4 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LTC6373SDFM#TRPBF36V FULLY DIFF, PROG-GAIN AMPLIF |
4,174 | - |
|
Datasheet | - | 12-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Instrumentation | 1 | Differential | 12V/µs | - | 4 MHz | 2 pA | 92 µV | 4.4mA | 47 mA | 9 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount, Wettable Flank | 12-DFN (4x4) |
|
LT1259IN#PBFIC OPAMP CFA 2 CIRCUIT 14DIP |
2,095 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Active | Current Feedback | 2 | - | 1600V/µs | 130 MHz | 130 MHz | 20 µA | 2 mV | 5mA (x2 Channels) | 60 mA | 4 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
AD820BRZ-REELIC OPAMP JFET 1 CIRCUIT 8SOIC |
1,473 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 3V/µs | 1.9 MHz | - | 2 pA | 300 µV | 700µA | 20 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
