Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1465CS#TRPBFIC OPAMP JFET 4 CIRCUIT 14SO |
2,868 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 0.9V/µs | 1 MHz | - | 0.5 pA | 600 µV | 145µA (x4 Channels) | - | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
LT1497CS#TRPBFIC OPAMP CFA 2 CIRCUIT 16SO |
2,638 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 2 | - | 900V/µs | - | 50 MHz | 7 µA | 3 mV | 7mA (x2 Channels) | 220 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
AD8228BRZ-RLIC INST AMP 1 CIRCUIT 8SOIC |
3,589 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 2.5V/µs | - | 650 kHz | 400 pA | 50 µV | 850µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8228BRMZ-RLIC INST AMP 1 CIRCUIT 8MSOP |
1,029 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 2.5V/µs | - | 650 kHz | 400 pA | 50 µV | 850µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LTC6433AIUF-15#TRPBFIC OPAMP GP 1 CIRCUIT 24QFN |
3,098 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | - | - | - | 2 GHz | - | - | 95mA | - | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
LT1793AIN8#PBFIC OPAMP JFET 1 CIRCUIT 8DIP |
3,778 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 3.4V/µs | 4.2 MHz | - | 3 pA | 250 µV | 4.2mA | - | 9 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LT1168IN8#PBFIC INST AMP 1 CIRCUIT 8DIP |
4,597 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.5V/µs | 400 kHz | - | 80 pA | 20 µV | 350µA | 32 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
ADA4625-2ARDZ-RLIC OPAMP JFET 2 CIRCUIT 8SOIC |
4,516 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tape & Reel (TR) | Active | J-FET | 2 | Rail-to-Rail | 48V/µs | 18 MHz | 16 MHz | 7 nA | 100 µV | 4mA (x2 Channels) | 33 mA | 5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC-EP |
|
|
LT1169CS8#TRPBFIC OPAMP JFET 2 CIRCUIT 8SO |
1,699 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 4.2V/µs | 5.3 MHz | - | 4 pA | 600 µV | 5.3mA (x2 Channels) | - | 9 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LT1122ACJ8IC OPAMP JFET 1 CIRCUIT 8CERDIP |
1,980 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 80V/µs | 14 MHz | - | 10 pA | 120 µV | 7.5mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
