Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8609ARZIC CMOS 4 CIRCUIT 14SOIC |
1,519 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 4 | Rail-to-Rail | 0.1V/µs | 400 kHz | - | 0.2 pA | 12 µV | 40µA (x4 Channels) | 70 mA | 1.8 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
AD8099ACPZ-REEL7IC OPAMP VFB 1 CIRCUIT 8LFCSP |
1,150 | - |
|
Datasheet | - | 8-VFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1350V/µs | - | 510 MHz | 6 µA | 100 µV | 15mA | 178 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
LT6231CDD#PBFIC OPAMP GP 2 CIRCUIT 8DFN |
534 | - |
|
Datasheet | LT® | 8-WFDFN Exposed Pad | Tube | Active | General Purpose | 2 | Rail-to-Rail | 70V/µs | 215 MHz | - | 5 µA | 450 µV | 3.3mA (x2 Channels) | 30 mA | 3 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
AD8676BRZIC OPAMP GP 2 CIRCUIT 8SOIC |
267 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 2.5V/µs | 10 MHz | - | 2 nA | 12 µV | 2.7mA (x2 Channels) | 20 mA | 10 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LTC6102HDD#TRPBFIC CURRENT SENSE 1 CIRCUIT 8DFN |
5,826 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 4 V | 60 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LTC6102HMS8#TRPBFIC CURRENT SENSE 1 CIRCUIT 8MSOP |
5,820 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 4 V | 60 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
LTC6102HDD#PBFIC CURRENT SENSE 1 CIRCUIT 8DFN |
5,462 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tube | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 4 V | 60 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
LTC6102HMS8#PBFIC CURRENT SENSE 1 CIRCUIT 8MSOP |
1,923 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 4 V | 60 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
ADA4091-2ACPZ-R7IC OPAMP GP 2 CIRCUIT 8LFCSP |
12,997 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.46V/µs | 1.27 MHz | - | 50 nA | 35 µV | 200µA (x4 Channels) | 20 mA | 3 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP-WD (3x3) |
|
AD8622ARMZIC OPAMP GP 2 CIRCUIT 8MSOP |
8,446 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.48V/µs | 560 kHz | - | 45 pA | 10 µV | 215µA (x2 Channels) | 40 mA | 5 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
