Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD548KNIC OPAMP GP 1 CIRCUIT 8DIP |
4,306 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 1.8V/µs | 1 MHz | - | 30 pA | 300 µV | 170µA | 15 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
AD526JNIC OPAMP PGA 1 CIRCUIT 16DIP |
3,810 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Programmable Gain | 1 | - | 24V/µs | - | 4 MHz | 50 pA | 400 µV | 10mA | 10 mA | 9 V | 33 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
AD524BDIC INST AMP 1 CIRCUIT 16CDIP |
1,135 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 1 MHz | 1 MHz | 25 nA | 100 µV | 3.5mA | - | 12 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
|
AD524ADIC INST AMP 1 CIRCUIT 16CDIP |
1,243 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 1 MHz | 1 MHz | 50 nA | 250 µV | 3.5mA | - | 12 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
AD210ANIC OPAMP ISOLATION 1 CIRC 12DIP |
1,813 | - |
|
Datasheet | - | 38-DIP (0.800", 20.32mm), 12 Leads | Tube | Obsolete | Isolation | 1 | - | 1V/µs | - | 20 kHz | 30 pA | 15 mV | 50mA | 5 mA | 14.25 V | 15.75 V | -25°C ~ 85°C | - | - | Through Hole | 12-PDIP |
|
AD202JNIC OPAMP ISOLATION 2 CIRC 11DIP |
4,336 | - |
|
Datasheet | - | 38-DIP (0.600", 15.24mm), 11 Leads | Tube | Obsolete | Isolation | 2 | - | - | 2 kHz | - | 30 pA | 15 mV | 5mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 11-PDIP |
|
AD712JRIC OPAMP JFET 2 CIRCUIT 8SOIC |
3,239 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 20V/µs | - | 4 MHz | 25 pA | 300 µV | 5mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
AD712AQIC OPAMP JFET 2 CIRCUIT 8CERDIP |
2,189 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | J-FET | 2 | - | 20V/µs | - | 4 MHz | 25 pA | 300 µV | 5mA | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD711JRIC OPAMP JFET 1 CIRCUIT 8SOIC |
4,230 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 1 | - | 20V/µs | - | 4 MHz | 15 pA | 300 µV | 2.5mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
AD713JR-16IC OPAMP JFET 4 CIRCUIT 16SOIC |
1,583 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | J-FET | 4 | - | 20V/µs | - | 4 MHz | 10 pA | 300 µV | 10mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
