Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-88565012AIC OPAMP GP 4 CIRCUIT 20CLCC |
4,039 | - |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 4 | - | 3V/µs | 6 MHz | - | 7 nA | 100 µV | 9mA | - | 9 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD8003ACPZ-REELIC OPAMP CFA 3 CIRCUIT 24LFCSP |
1,038 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Obsolete | Current Feedback | 3 | - | 3800V/µs | - | 1.65 GHz | 7 µA | 700 µV | 9.5mA (x3 Channels) | 100 mA | 4.5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 24-LFCSP-WQ (4x4) |
|
AD8538ARZ-REELIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
4,499 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Zero-Drift | 1 | - | 0.4V/µs | 430 kHz | - | 15 pA | 5 µV | 150µA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8538AUJZ-R2IC OPAMP ZERO-DRIFT 1 CIRC TSOT5 |
2,380 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Discontinued at Digi-Key | Zero-Drift | 1 | - | 0.4V/µs | 430 kHz | - | 15 pA | 5 µV | 150µA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
AD8538AUJZ-REELIC OPAMP ZERO-DRIFT 1 CIRC TSOT5 |
1,405 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | Zero-Drift | 1 | - | 0.4V/µs | 430 kHz | - | 15 pA | 5 µV | 150µA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
AD8677AUJZ-R2IC OPAMP GP 1 CIRCUIT TSOT23-5 |
2,884 | - |
|
Datasheet | iPolar® | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | - | 0.2V/µs | 600 kHz | - | 200 pA | 45 µV | 1.1mA | 15 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
AD8677AUJZ-REELIC OPAMP GP 1 CIRCUIT TSOT23-5 |
1,208 | - |
|
Datasheet | iPolar® | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.2V/µs | 600 kHz | - | 200 pA | 45 µV | 1.1mA | 15 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
AD625CDZIC INST AMP 1 CIRCUIT 16CDIP |
4,760 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 25 MHz | 650 kHz | 10 nA | 10 µV | 3.5mA | - | 12 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
|
AD524CDZIC INST AMP 1 CIRCUIT 16CDIP |
4,880 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 1 MHz | 1 MHz | 15 nA | 50 µV | 3.5mA | - | 12 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
AD8502ARJZ-R2IC CMOS 2 CIRCUIT SOT23-8 |
4,041 | - |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 0.004V/µs | 7 kHz | - | 1 pA | 500 µV | 750nA (x2 Channels) | 5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
